Electronics Forum | Thu Aug 05 12:16:15 EDT 2021 | cyber_wolf
Exposure Controls: 8.9 HF Engineering Controls: Use only with production equipment (such as stencil printers and re-flow furnaces) with adequate exhaust ventilation and other safety features specifically designed for use with solder paste. Contro
Electronics Forum | Mon Feb 21 09:56:22 EST 2005 | davef
AJ: What are you cleaning with IPA? Problems with IPA are: * Hazardous material by RCRA criteria (40CFR 261) * Flash point (~12�C TCC) is sufficiently low that all electrical equipment within a few meters of the bath must be flameproofed or intrinsi
Electronics Forum | Thu Nov 10 07:57:51 EST 2005 | davef
AJ: Problems with IPA are: * IPA / material being 'cleaned' combination still needs to be removed from the stencil. * IPA and empty containers are a hazardous material by RCRA criteria (40CFR 261) * Flash point (~12*C TCC) of IPA is low enough that a
Electronics Forum | Tue Aug 01 22:04:11 EDT 2006 | davef
Problems with IPA are: * IPA / material being 'cleaned' combination still needs to be removed from the board. * IPA and empty containers are a hazardous material by RCRA criteria (40CFR 261) * Flash point (~12*C TCC) of IPA is low enough that all ele
Electronics Forum | Tue Aug 15 20:41:54 EDT 2006 | davef
Alpha UP78 was a modern solder paste. Check with your supplier for recommendations. You're are cleaning some flux residue with the IPA and reducing the leakage current. We're not wild about using IPA. Problems with IPA are: * IPA / material being
| 1 |
