Electronics Forum | Wed Oct 02 15:08:37 EDT 2002 | Eric
See Fiske first line. I'd bet You are bending or catching the assembly in the ICT. How many probes at 8OZ each? do you use on that ICT? 800 probes = 400lbs. See "Flexure induced failure of BGA solder joints" by Compaq Houston TX
Electronics Forum | Thu Sep 12 10:45:29 EDT 2002 | pbarton
We have used a laser cut stencil 0.15mm (0.006") thick with 0.3mm (0.012") square apertures radiused in the corners 0.06mm (0.0025") to aid paste release. This approach with the (type 3) paste we use has proven successful on thousands of devices plac
Electronics Forum | Tue Jul 14 18:42:41 EDT 2009 | anndi
1smtdude, I interested in your explaination of > re-work an underfill part. You mention the > material can be heated to a plastic state to > become vicious... do you know usually what range > is the temperate? (guess it can depend on the > type
Electronics Forum | Thu Apr 05 05:37:43 EDT 2018 | balachandran
Recently we have seen the BGA Ball collapsing issue in the field. The unit has the clean manufacturing records at factory, But in the same unit we did the cross section and found Ball explosion only in VDD and VDDQ pins. Can anyone help me to underst
Electronics Forum | Mon Aug 09 16:37:14 EDT 1999 | John Thorup
| Just curious what effect pinholes and solder voids can have on solder joints that have high current passing thru them. Also could moisture from steam sterilization (autoclaving) get inside a said solder joint and then outgas during high current, an
Electronics Forum | Mon Nov 12 06:05:15 EST 2001 | nop_e
Dear all I 'm looking the minimum X-Ray machine capability that is capable to inspect the solder joint of BGAs, Fine pitch BGA and CSP such as open, poor solder joint ,etc... What is the machine specification needed? Thank you for your advise.
Electronics Forum | Thu Oct 13 16:08:11 EDT 2011 | davef
BGA solder joint reliability is actually improved slightly from a double-sided reflow. [Jean-Paul Clech APEX 2003 Solder Joint Reliability of BGA Assemblies]
Electronics Forum | Wed Sep 21 16:25:43 EDT 2005 | GS
IPC-7525 tells you how to make stencil apertures for BGA IPC-7095 tells you how much should be the paste volume in order to get a reliable BGA solder joint. How are your PCB finisced? (HASL, ENIG, OSP, etc?) In case of not HASL, it could be necessa
Electronics Forum | Tue Dec 23 01:23:45 EST 1997 | J.H Kim
I'd like someone gives me a tip for elemating of voids in the mico BGA solder joint and the method of inspection of them, very exactly.
Electronics Forum | Tue Dec 23 01:25:38 EST 1997 | J.H Kim
| I'd like someone gives me a tip for elemating of voids | in the mico BGA solder joint and the method of inspection | of them, very exactly.
