Electronics Forum | Wed Jan 23 13:39:04 EST 2008 | davef
Ventilation rates express the flow rate of outside air brought into a building and are typically normalized by the volume of space being ventilated (air changes per hour), by the area of the floor being ventilated (cubic feet per min (cfm) per ft2) o
Electronics Forum | Mon Jan 28 08:15:52 EST 2008 | davef
He sure was. We saw this version of it a couple of years ago [ http://www.youtube.com/watch?v=TD1LHejil6M&feature=related ]. In this one, the presenter almost cracks a couple of times, but the boffin in the white coat is rock solid.
Electronics Forum | Tue Jul 17 10:47:54 EDT 2012 | upguy
As as per your information and photo, we attached two box fans under our booster and attached them to the white XGTS connector. The fans are blowing upward with airflow between the booster board and the back of the machine. We will carefully watch
Electronics Forum | Thu May 02 14:58:20 EDT 2013 | stephendo
Kurtz had a guy that was great with the machine. I strongly suggest that you watch the wave height test a few times in the morning then at lunch and at the end of the day. Look where the solder goes up to on the probe. If it doesn't work consistent
Electronics Forum | Mon Aug 24 18:45:11 EDT 1998 | Steve Evers
| We are looking at implimenting a bar code system for a SMT | production line. To start we are looking at label printer/applicators. Are there any other companies that we should consider besides Zebra and Imtec?? Thanks for your input. | John If
Electronics Forum | Tue Aug 26 16:24:18 EDT 2008 | rway
We currently use a YesTech M1 system and we are looking to buy another. Two important areas to look at when pursuing AOI equipment: 1) Camera resolution 2) Light sources Depending on your needs, camera resolution can be important depending on the si
Electronics Forum | Wed Nov 28 18:24:05 EST 2001 | mparker
Back in the days when pots, skillets, etc. were made of cast iron, vegetable oils were used to "season" the iron to prevent rusting and also from the food sticking to the pot during cooking. It would be reasonable to believe that you could use the sa
Electronics Forum | Tue Aug 25 21:01:45 EDT 1998 | Peter
We use an Intermec 3240 Thermal transfer printer and print on polyimid label material that survives the reflow and wave solder (top side only) process without turning black. Labels run around 3-4 cents per depending on the size (We found Imtec label
Electronics Forum | Wed Feb 27 13:11:04 EST 2008 | tonyamenson
I was asked to post my finding about HumiSeal stripper for polyurethane coating. Both as an information sharing as well as someone who may offer advice on teh situational use of 1063 solvent stripper. So here is what I found: The stripper worked t
Electronics Forum | Fri Aug 28 18:57:49 EDT 1998 | Mike Cleary
Selecting the correct label solution for SMT labeling is a science. Our company is a supplier of electronic identification products. Please let me know if you have questions regarding materials, printers, etc. I have been in this industry for over
winsouce.jpg)
