Electronics Forum | Tue Apr 19 10:19:28 EDT 2011 | leemeyer
We currently have a job that uses press fit solderless pins. The pins are custom and only supplied in bulk packaging. I am looking for a machine that can orient the pins and present them to my insertion machine. Of course i need the pin to be present
Electronics Forum | Fri Nov 21 13:14:21 EST 2003 | pjc
Panasonic is another supplier of automatic radial lead insertion machines. Go to: http://www.panasonicfa.com/cgi-bin/product.cgi?prodline=electronics%20assembly&category=Pin%20Through-Hole∏id=rh5 www.panasonicfa.com
Electronics Forum | Tue Aug 28 23:53:31 EDT 2007 | crashoveride
dedicated fixture works best if the board is very much populated. But if the parts to be inserted are less than 300components, adjustable fixtures may be used. But the secret of good insertion is a precisely measured tooling pin to prevent the boards
Electronics Forum | Fri May 26 14:22:27 EDT 2000 | JAX
GP, What are some of the details. type?(mictor) guide pins?(yes/no) component demensions? Machine inserted? Force of insertion?
Electronics Forum | Fri Feb 11 08:44:26 EST 2005 | pemnut
We use these machines to insert swedge pins. When I first started here, there were certian programs that we ran that required us to put in a machine offset of +.120 in the X which is a lot. after learning the machines better, I realized that whoever
Electronics Forum | Thu Aug 31 00:07:24 EDT 2000 | Ramon I Garcia C
I Kyung: I'm not sure if we are working with PIHR but we insert some pines in a PCB with a pin inserter machine, after that we run this pcb in a screen printer and put over its solder paste, and then run in a chip shooter and then IC placer and f
Electronics Forum | Tue Nov 07 09:26:37 EST 2000 | Peter Barton
Adam, The most common cause for this problem is a variation in the plating thickness of the through holes, particularly if they are Sn/Pb solder levelled PCB's. Most pressfit connectors require a fairly tight control on the diameter of the holes to
Electronics Forum | Tue Dec 14 12:41:56 EST 1999 | Kris W
Glen, Although the previous answers probably fit the problem you are having, we recently found that during pin insertion on an Autosplice machine, the gold was flaking from the pins and lodging between the legs of surface mount components. It would
Electronics Forum | Fri Sep 21 13:04:58 EDT 2007 | jmelson
Hello, Is anyone using an SMT pick&place machine to insert single contacts into PC boards? I have some boards that have 32 female contacts for 1mm pins, and 16 contacts for 0.5mm pins. I have been using Mill-Max for these contacts, getting the sma
Electronics Forum | Mon Nov 14 09:12:24 EST 2022 | kutayuysal
My company would like to invest and SMT Line boards. Boards are simple for P&P machines, couple of 603 and 402 components which most of machines are capable to place. Challenging part is Pin-in-Paste terminals. Those terminals produce with metal stri