Electronics Forum | Mon Sep 19 04:27:47 EDT 2005 | dougs
Check your power supplies, we had same fail a while back on VIP98 faulty power supply was the cause
Electronics Forum | Mon Jul 07 09:47:50 EDT 2008 | davef
Dye & pry test reveals the solder connections that have failed prior to performimng the test.
Electronics Forum | Tue Sep 09 12:47:31 EDT 2014 | horchak
if all else fails get a bigger hammer lol
Electronics Forum | Thu Dec 01 14:47:25 EST 2005 | Amol Kane
Hi, I am testing some lead-free assemblies using ATC. it was suggested to me that if i do in-situ testing, then i should measure the starting resistance, and subsequent resistances values after n cycles, and when the resistance value increases by 1 o
Electronics Forum | Fri Jun 14 13:47:21 EDT 2013 | rway
Chances are this is not a component failure. First, these are passive components with passive testing on the ICT. He may have guarding issues, but more information is required as has been stated. Are all capacitors with the same P/N failing in dif
Electronics Forum | Wed Sep 14 10:47:55 EDT 2005 | John
I had to replace a failed hard drive on our Meridian 1030. After replacement the script is not running on start-up for the Vx works connection to the VME. Any help with the proper boot sequence would be appreciated.
Electronics Forum | Mon Dec 03 13:47:39 EST 2007 | gregp
I hope this isn't a silly question but... isn't there a way to manually override when a fiducial fails vision? I can't imagine a machine that would be available without this basic feature. Greg
Electronics Forum | Sun May 16 20:47:25 EDT 2010 | aungthura
Thanks Dave I tried various sockts but all were failed.At SnPb profile,maximum- 230'c~240'c, the solder at sockets' pins not melted.Increasing to 250'C, the sockts were deformed.
Electronics Forum | Tue Jan 19 08:33:47 EST 2021 | ecogroup
Changed out the front I/F board, contactors engaged & G9D-301 works.
Electronics Forum | Tue Jul 29 09:47:40 EDT 2003 | davef
We agree with Russ and Ioan that rework does not cause black pad. It's caused during the board fabrication process. On the other hand, we think: * Mantis wants to reduce the amount of reworking of boards that fail due to a black pad problem. *
