Electronics Forum | Thu Nov 19 13:49:00 EST 2009 | bricke
We have been manufacturing a part using bright electrolytic tin as the finish. Our customer has been hand soldering using 63/37. They have recently switched to SN96 and have been experiencing solderability issues. We have sent samples to an outside
Electronics Forum | Thu Feb 11 20:38:47 EST 2016 | davef
Try: * J-STD-003 “Solderability Tests for Printed Boards” * IPC-4555 OSP Finish Specification
Electronics Forum | Tue Apr 24 12:44:11 EDT 2001 | Steve
Take a look at J-STD-003, Solderability Tests for Printed Boards. This may help you create a procedure.
Electronics Forum | Wed Sep 10 17:12:55 EDT 2008 | gregoryyork
I dont know about analysis on boards it is OK as long as the people carrying it out know how to interogate the answers.I worked on a problem just last week where an analysis house in China tested the resist then the pads and found on both surfaces C
Electronics Forum | Thu Feb 11 15:04:59 EST 2016 | cinthiaap
What is the most appropriate method to solderability test in OSP surface finish PCB? I have used Edge Dip for Surface Features testing, but the results are failed in some features. I haven't also found standards to OSP surface finish. Thank you for n
Electronics Forum | Mon Jan 23 20:58:08 EST 2006 | davef
J-STD-003B - Solderability Tests for Printed Boards is currently a "Working Draft". Look here: http://www.ipc.org/status.asp
Electronics Forum | Mon Jan 23 03:12:13 EST 2006 | adeline_ko
The FA department is using IPC or J-STD-003 to do the solderability test for the leaded PCB FA qualification. Class A. However, there is no mention of Lead free testing for the PCB bare brd. Can anyone advise whether IPC has release a solderability
Electronics Forum | Mon Mar 21 02:41:29 EDT 2011 | kemasta
Hi It's me again. Our products need to pass a chamber test 45c/36hrs after the PCBA completed batch of functional tests and assemble in to case. We found 1 unit was functioning for 24hours in the chamber, but hang after that. We tried to re-boot the
Electronics Forum | Tue Feb 14 13:16:49 EST 2006 | Carol Stirling
CRITICAL DILEMA! Has anyone run into the problem described below and if so, what was the fix (besides not dealing with this Supplier)? Also, we do not have component manufacturing process experience. We are purchasing a surge resistor that function
Electronics Forum | Tue Sep 24 13:03:51 EDT 2019 | davef
IPC-J-STD-003C: Solderability Tests for Printed Boards [ https://shop.ipc.org/IPC-J-STD-003C-WAM1-2-English-D ]
