Electronics Forum | Tue Jan 30 20:38:32 EST 2007 | davef
NASA Internal Advisory: NASA-Issued Return to Flight Wristbands Contaminated with Silicone [snip] 10. PROBLEM DESCRIPTION: Recently we have been made aware of a silicone problem associated with the "Return to Flight" wristbands. These wristbands are
Electronics Forum | Wed Aug 04 11:01:46 EDT 2010 | ooskii
I have a question concerning what plating will go into solution during the reflow process. I am soldering a small piece of ceramic (120x180 mils 7 mil thick) onto a flex circuit. I am seeing some fractures that I am sure are being caused by handlin
Electronics Forum | Mon May 18 11:39:30 EDT 1998 | Earl Moon
| | We had some failures on an IC package that the manufacturer has put down to moisture inside the package, leading to popcorning. | | This seems a bit odd, the package is a PLCC 84 which is quite thick. I have only seen this problem on thin package
Electronics Forum | Fri May 15 10:41:12 EDT 1998 | Dave F
| | | We had some failures on an IC package that the manufacturer has put down to moisture inside the package, leading to popcorning. | | | This seems a bit odd, the package is a PLCC 84 which is quite thick. I have only seen this problem on thin pac
Electronics Forum | Thu Sep 24 18:57:03 EDT 2009 | davef
From "siliconfareast.com": Basic Die Cracking FA Flow 1) Failure Information/Device and Lot History Review. Understand the customer's description of the failure, i.e., the failure mode, where it was encountered, what conditions the sample was subject
Electronics Forum | Thu Apr 03 17:50:53 EDT 2014 | rboguski
We use it almost exclusively in manual mode for PCBA failure analysis. Our main purpose is to find head-in-pillow defects; secondarily incomplete wetting of ball to substrate. In two years of almost continuous use we have only had occasion to use t
Electronics Forum | Wed May 01 20:48:44 EDT 2002 | ianchan
Hi, I agree that professional-role accountability (QA, Process, Manufacturing, Materials, etc...) is of paramount importance. in fact nothing yielding results, gets to be done without followup in continual improvement action unless individuals are
Electronics Forum | Tue Aug 10 09:09:39 EDT 2004 | mattkehoe
wash->ssd top->wash->sticky flux bottom side->place smt components->reflow->wash->sticky flux top side->place topside smt components->reflow->wash) ssd is basically the process of applying solder paste to the pcb with a stencil and the solder reflowe
Electronics Forum | Wed Aug 14 18:17:32 EDT 2019 | slthomas
We are down to the last few unresolved PCBA test failures in a work order and scrambling to get them repaired and into a mechanical assembly. What we have found in quite a few of these cases are cracked 1206 MLCCs. The failed parts are all the same
Electronics Forum | Mon May 18 11:50:23 EDT 1998 | Earl Moon
| | | We had some failures on an IC package that the manufacturer has put down to moisture inside the package, leading to popcorning. | | | This seems a bit odd, the package is a PLCC 84 which is quite thick. I have only seen this problem on thin pac
