Electronics Forum | Sat Jul 04 01:11:17 EDT 2009 | cesar444
Dear Adresse, I ’m sorry my disturbing you with my e-mail, but I need some help from you. I have a QUAD 1000 SMT machine, and I would be need a software-driver copy and a technical drawing to this machine. If you could help me, pls send these by e-m
Electronics Forum | Mon Jul 06 02:23:31 EDT 2009 | bobpan
Hello Andras, I worked on those machines 10-15yrs ago. I dont recall having software or having to re-install it. Can you state the problem that you are having with the machine. I can try to help but most of my technical information has long been gone
Electronics Forum | Mon May 16 13:43:41 EDT 2005 | michaelmcclay
Hi Bobpan, I would like to know if you have access to the original Quad 1000 software? I have an operator who "updated" the configuration software on the Quad and hosed it up.
Electronics Forum | Mon May 16 17:58:54 EDT 2005 | ??
Are you sure you dont mean quad 100. The software for a quad 1000 (which was a samsung machine) was not available on disks or to install......I dont recall ever seeing it on a disk. If its a quad 100, you would need version cc5.6d central controller
Electronics Forum | Mon May 16 13:40:42 EDT 2005 | michaelmcclay
Hi C.B, I have been doing some repairs on a Quad 1000 and I am getting to know it better that I want to. My comapny is located in San Jose, CA and I can offer you on site support if you are in the area. I also had an operator "update" the configura
Electronics Forum | Mon Feb 06 19:56:07 EST 2006 | bobpan
Ok....that is very vague...but here is the approach i would take. 1. rename permanen.tbl file and reboot 2. rename calibrat.arc file and reboot * both files are located in c:\2kla\gui\guiqsv1* If it fixes the problem....it was a software issue. 3. If
Electronics Forum | Wed Feb 23 15:19:49 EST 2005 | Dilbert
I don't work on quads but I can give you some things to look for... Each of the moving axis work off a motor that is controlled by a "drive". Some of these drives have a fault or error output that is connected to the motion controller. One of your
Electronics Forum | Thu Feb 22 09:21:57 EST 2007 | Cmiller
Mydata would be good, Contact Systems would be good for what you are doing, very good software, crappy feeders but fine for 0805 parts. You may be able to get a Universal GSM pretty cheap these days. If you make a decision then look for a machine you
Electronics Forum | Sun Mar 22 19:11:43 EDT 2020 | sarason
THe Ealead software pretty much does everything for $1000US, Its big weakness is its importing, for this you use PCBSynergy. Have you tried the Ealead demo it run's for a month.But it is limited to 10 feeders sarason.
Electronics Forum | Sun Mar 22 19:33:54 EDT 2020 | kylehunter
> THe Ealead software pretty much does everything > for $1000US, Its big weakness is its importing, > for this you use PCBSynergy. Have you tried the > Ealead demo it run's for a month.But it is > limited to 10 feeders sarason.
winsouce.jpg)