Electronics Forum | Fri Jul 21 13:13:53 EDT 2006 | vikkaraja
I have checked the lead screw and guide rails. There is't any apparent damaged to any one of them. I was hoping it be the guide rails because they are much eaier to repalce than the lead screw. If I start messing around the lead screw, It would requi
Electronics Forum | Fri Jan 18 11:22:52 EST 2008 | vikkaraja
I went to class a long time ago and I have the procedures. I just have to find it. Just make sure you maintenance person knows what he or she is doing. It just takes a little patience. E-mail me your fax or phone number
Electronics Forum | Fri Jan 25 21:05:24 EST 2008 | daxman
Hey, It's not so bad, but you'll need nozzle jigs to measure camera angle and resolution and also a good dial indicator. I'm pretty sure that I have the pdf's handy as well. send me an email at meshuga@sasktel.net. I'll be able to send you the info
Electronics Forum | Mon Dec 08 17:06:54 EST 2008 | smellew
Hi Grid lock & others are ok solutions but i've tried them all the best system i received was from a company in eastern eu called cisoli ltd they supply support systems for DEK's MPM's and any placement machine i used them on DEK ELA Fuji CP642 & IP3
Electronics Forum | Fri Mar 13 15:00:18 EDT 2009 | dman97
Can somebody take a look at this screen shot and tell me what it is supposed to mean. Every time I try to transmit this program to my CP642 machine I get this error. Does any one know what this error means and how would I correct it? Thanks for yo
Electronics Forum | Wed Apr 09 03:32:49 EDT 2014 | sarason
Place a Digital CRO on that 24V rail. Watch the output. trigger on voltage drop lets say 18V picking a figure out of the air. You may well have another rail in your supply or nearby pulling your 240V //110V rail. Most likely a shot Electro either on
Electronics Forum | Tue May 26 00:22:35 EDT 2015 | hemantp
help required for understanding correct nozzle for the fuji feeder ( CP642 or QP242 )mounting of the SMT Pogo pins ( single Pin ) The Part nos are 1. P/N : HCS0712SM01-B20150507 (Female pin) and 2. P/N : N005M1-01C000CR (Male pin).
Electronics Forum | Thu Jul 02 16:55:27 EDT 2015 | aemery
Been working on MPM printers for 20+ years; it's what I do! (CM, Speedline FSE/Trainer, Independent contractor) If MPM built, I keep them running. AP's to Accela's. info@primetechservices.net 858.449.0007
Electronics Forum | Tue Jul 14 14:08:27 EDT 2015 | ldmservice
I am able to help you with Panasonic MV although some parts are had to come by. I also have experience with MPM. Let me know what you need and we can work out details.
Electronics Forum | Tue Jul 02 10:34:48 EDT 2019 | dman97
You should be using the diagram on page 4. 9pin to 25 pin. Flexa settings should be set to NT C/C. You have to make sure that the COM settings in windows are set correctly for the USB adapter you are using. Whatever COM port windows assigns to the US
