Electronics Forum | Wed Jan 16 14:18:38 EST 2008 | scotceltic
We have a problem with our wide view camera on our CP642. Does anyone have the replacement procedure laying around ? We need to replace it and Fuji is telling us that it is proprietary info. unless you have been to the class. Well we have a few gu
Electronics Forum | Fri Jan 12 15:35:05 EST 2024 | madisreivik
On my CP642 I got narrow camera for 0201 parts. My question: some thick (2mm+) 0805 components look blurry. Is there a part height limit for the narrow camera ? I noticed that some parts predefined from previous owner were made to wide camera, alth
Electronics Forum | Thu Mar 22 17:18:17 EDT 2018 | rodrigo
Hi all, Our (new/used) CP642 resets the nozzles heads first time I do a nozzle centering after power on. But we're getting errors st17 and st19 and while working on the sensors I noticed that it does not resets the heads before I start a nozzle cent
Electronics Forum | Fri Dec 08 18:02:21 EST 2023 | jdengler
Not sure on CP6's but CP2 through CP4 series used jigs. We now have an AIMEXIII and it uses jigs. I would bet that there are jigs for the CP6 series machines.
Electronics Forum | Fri Jun 22 11:02:13 EDT 2007 | gregf912
I have a CP642E machine that will not function if auto adjust is enabled in Part Descriptor. Symptom: Auto pick offset causes machine to pick part off center to the point of going to end of part after several picks. This only happens to parts that ha
Electronics Forum | Wed Apr 22 12:50:39 EDT 2020 | rodrigo
Hi all, One of our Fuji CP-642 machines has a weird problem. It does not happen every time but often enough that it is a problem. I power up and press start to zero it. The problem is the zero...ing does not finish. It moves the xy-table, D1/D2 table
Electronics Forum | Wed Dec 06 17:22:03 EST 2023 | madisreivik
Hello and help ! After changing oil hose, cleaning machine and all nozzles, CP642 narrow camera started to flicker. And in nozzle centering measuring, no image at all. We checked syncro pin, seems ok. Also checked camera picture with Sony monitor,
Electronics Forum | Mon Oct 29 15:57:44 EDT 2012 | ngotranbestek
Hi Michel CP642 ont interface with RS-232. All machine CP6 or IP3,..will connect to DigiBox ( RS232 Port)and connnect to Computer have Sofware Flexa.
Electronics Forum | Fri Mar 22 08:15:49 EST 2002 | PeteC
If considering CP-6 go for the model CP-642, an improvment. Most equipment have hour counters or placement counters and you'll want to get the "counts" See it running and do a qualification run before you make the purchase.
Electronics Forum | Tue Nov 25 10:40:50 EST 2003 | Fuji_Dude
Try putting on new springs on the feeders. This a common and frustrating problem with CP6/7 feeders.
