Electronics Forum | Tue Feb 07 12:26:07 EST 2023 | nitroone
Hi Tom, thank you so much for your feedback! I have been looking into getting better extractors for the work areas, However we don't have any for PCB washer so that might be one of the issues too. What kind do you use for the PCB washer? I'm very new
Electronics Forum | Thu Feb 14 23:08:41 EST 2013 | dekhead
Squeegee error on a 248 is strictly that sensor (reed SW) on corresponding (Front / rear) squeegee cylinder is not seeing a change in state... Either a physical obstruction preventing cylinder from exending fully - OR- if it is extending fully, then
Electronics Forum | Thu Jul 09 15:58:50 EDT 2020 | tylerrobertson
Bob you like beer? I'll send you a beer.. what's the IQ function, just feedback from the sensors/switches on the feeder?
Electronics Forum | Fri May 16 13:43:29 EDT 2003 | T.Vick
Yukim, Just another thought (way off the solder paste trail that you've been on so far)....Are the parts similar in thickness? The 4796 and 4797 HSP's have a closed loop function that compensates for variations in component thickness based on fe
Electronics Forum | Sat Nov 05 07:17:25 EST 2005 | JeffP
That was the case with your oven but it is not so with ours. First, the distance from walls of the inner chamber to the product differs from one oven to another. Second, the dissipation of heat from metal heats up the air in the oven which in turn h
Electronics Forum | Tue Mar 28 19:28:54 EDT 2017 | aemery
Giao, These style of MPM's use stepper motors, but no feedback like an encoder or a resolver. In other words all axis positions are assumed after "Reset" of the machine. Because of this style of drive system there is the potential for the vision ga
Electronics Forum | Fri Mar 21 15:51:23 EDT 2008 | g2garyg2
Thought I would reply and try to assist. PROMATION, my company, also manufactures Diode Laser soldering systems but with this stated we also manufacturer iron tip systems, soft beam systems and hot air solutions. The reasons are simple. Diode Laser
Electronics Forum | Sun Oct 19 19:01:20 EDT 2003 | harotec
Dave and Pete No bad words against a good batch oven. I don't know the APS-oven mentioned but check out the description of the unique temperature-feedback system in our Ecosold at http://www.reflowsystems.com/press/PressReleases.pdf . As a matter o
Electronics Forum | Mon Apr 12 09:39:38 EDT 2004 | cedams
Ken, Thanks for the feedback. Unfortunately (or fortunately) I am in Mexico and we make our own PCBs. That is another conversation entirely and another of my fix-it projects but currently we drill the PCBs and align the artwork to the holes visually
Electronics Forum | Wed Feb 15 13:44:34 EST 2006 | samir
Bingo! In my career, I've used Wave Solder optimizer and the WaveRIDER. Pro's and Con's to both. I did a GR&R on both as well, and WaveRIDER came out on top. The main challenge is to get the operators to use it. I've found that the operators wer
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
