Electronics Forum | Sat Oct 25 19:02:45 EDT 2003 | Gabriele
Main difference is the reel holder position and for sure the clamping pin location. Tape feeding system is different. Any way they cannot be compatible among them. Q type feeders must be used for MV Q-Type placer and K-type feeders must be used for M
Electronics Forum | Wed Jul 14 17:33:04 EDT 2004 | Ross Clunie
The short answer is "No" the white and green feeders are not interchangble. The green feeder has a channel in it to allow the "embosed" or plastic tape to fit flat at the pickup position. If you use paper tape in this type of feeder the tape can be d
Electronics Forum | Fri Jan 07 07:09:38 EST 2005 | cyber_wolf
We currently have agilis feeders and TM8 magazines for our Mydata machines. Our operators and set up people seem to dis-like the agilis feeders. When you set up a reel that already has the overlay tape peeled free from the carrier it gets in the way
Electronics Forum | Wed Jun 08 09:31:35 EDT 2005 | PWH
We have an HSP 4796B chipshooter on the floor. Feeder pick-ups after changeover (during new run start-up) are always a bit of a hastle. Can anyone tell me if a feeder "zeroing" jig works well? I always reset feeder B offsets. I recorded "B" offse
Electronics Forum | Fri Jun 10 09:39:14 EDT 2005 | jdengler
Once upon a time I worked for an equipment rebuilder. While employed there I installed many SMT machines. By far the best solution I ever experienced was more feeders preloaded with the next job. The next best solution I experienced was some custom
Electronics Forum | Thu Sep 22 10:48:08 EDT 2005 | Rob
Cheers Greg, It's unusual to have such direct access to manufacturers & their opinions. I'll tell you what really does get us, and splicing doesn't work well on these occaisions - big SMD connectors, requiring deep pocket feeders. You only get m
Electronics Forum | Fri Sep 23 09:25:46 EDT 2005 | Base
Hey Greg, As you already pointed out yourself: unless you can do away with covertape pickup-spools (or can figure out a way to empty them without loosing tension on the covertape) your feeders will not be suitable for several consecutive splices. S
Electronics Forum | Fri Sep 01 22:44:47 EDT 2006 | dmfausti
I have just been engaged again in SMT pick-n-place machines. My latest exposure is with Yamaha YV100 and YM84. I have been having some problem on feeders, especially on 1206 reel packages and above. The plastic cover on the reel does not peel off eas
Electronics Forum | Mon Jan 29 15:21:56 EST 2007 | flipit
If you teach your feeders, you can no longer gang pick correct? I have never had a dual beam or dual head GSM before. However, if you teach feeders with the fiducial camera and your picks are still off, there is an offset in one or several spindles
Electronics Forum | Mon Oct 22 10:35:54 EDT 2007 | mulder0990
We use Microsoft Access to track our feeders. I have made a system for the machine operators to tag the feeders when they run into problems. We seem to be having a lot of pitch issues. I am wokring on geting a calibration jig to solve that issue.
Major in whole line of SMT equipment, especially in Mounting And printing and AOI SPI, Serve Parts and acceccories.
Training Provider / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Floor 1,D Building,B area,Dongsheng Techwin Park,Bao'an District
Shenzhen, 30 China
Phone: 008618566662725
