Electronics Forum | Mon Jun 15 23:19:38 EDT 2020 | kylehunter
You literally just loosen both hex bolts and slide the bar to the pitch you want. Then tighten the bolts. You can also remove the bar, and flip it over to get additional pitches.
Electronics Forum | Tue Apr 02 17:22:50 EDT 2013 | microaide
That makes some sense. By knowing the coordinates of the leftmost and rightmost feeder, the others can be interpolated. As long as they are all the same type of feeder. But I still don't see how to configure an assortment of different types of vibrat
Electronics Forum | Wed Aug 03 21:00:12 EDT 2005 | rcarlos28
Crishan, Do you check the Nozzle orientation? some machine use a Rectangular o circle nozzle body, and this reduce the vaccum. When this component is taked from the feeder and the camara measured recognized the pins? Do you change the type of rec
Electronics Forum | Tue Mar 05 06:42:22 EST 2019 | cyber_wolf
This is for a specific type of CP43 feeder. It does not work on CP6 feeders. You also have to have the base it bolts onto, the standard, and the calibration tapes.
Electronics Forum | Tue Feb 24 16:57:03 EST 1998 | henry
EQUIPMENT FOR SALE QUAD 100 V3/V6 Low hours, Excellent condition, All latest factory revisions Firmware 3.65 Central controller software 5.6D with computer system Autoprogram software 5.31 1- 28" Latching feeder base 5- 4" Latching feeder b
Electronics Forum | Tue Aug 25 18:25:15 EDT 2009 | swag
If you have access to a machine shop you can build your own easily using the same bolt/tooling pin pattern as tracks. Place them on a vibratory track base and disconnect or turn the vibe down.
Electronics Forum | Thu Feb 28 12:16:08 EST 2019 | cyber_wolf
I have a CP43 calibration jig in excellent shape. Free to a good home. This is the jig that bolts to the stand with the microscope. I DO NOT have the stand with the microscope. See photo
Electronics Forum | Mon Apr 26 13:19:29 EDT 1999 | Dave F
| Hey Guys! | | Look what I get to try and do this week! I got handed a cardboard box on Friday afternoon with the parts and 20 of these little jewels! That's both sides of the board by the way... | bla-bla-bla | | Sure you don't wanna take this o
Electronics Forum | Fri Sep 10 09:00:40 EDT 2004 | rlackey
Hi, It should get you at least a 1997 machine, but the age isn't as critical as the UPS level - you want at least 3.2.3. They are good machines & are well built, and at least comparable with any other second user machines (although not in the Fuji/
Electronics Forum | Wed Jun 05 01:28:27 EDT 2002 | mantis
we had the fedder protection plates installed for about 6 months but ended up removing them as the plates were more hassel than there worth.The bolt on the estop swith kept slipping off and stopping the machine during produstion.It was very frustrat