Electronics Forum | Fri Sep 20 09:07:21 EDT 2002 | cyber_wolf
You are right. It is getting indexed twice. Once by the feed lever and once by the feed cylinder.
Electronics Forum | Sat Oct 08 16:17:43 EDT 2005 | tmv
in hsp 4796 particularly come this problem. the feeder shutter lever is strikly beloved and stopper was opened.how to clear this problem.
Electronics Forum | Mon Oct 10 14:43:19 EDT 2005 | cyber_wolf
"the feeder shutter lever is strikly beloved" I don't understand......
Electronics Forum | Thu Nov 29 15:52:53 EST 2007 | jmelson
Some other machines are a lot simpler. Here's how the Philips (mady by Yamaha) CSM84 works. Smaller tape (8 and 12 mm) feeders are all mechanical. A plunger on the head pushes a lever on the feeder at the same time the head comes down. First, the
Electronics Forum | Thu Jun 15 08:44:18 EDT 2006 | jdengler
Bert, The original IP feeders do a poor job of peeling the cover tape. Things to check: -All teeth present on the take-up reel -Take-up reel has even drag as it rotates (reel out of round or dirty) -Take-up reel drag is not too high (locations and
Electronics Forum | Wed Feb 27 04:23:13 EST 2008 | fujillews
Hi It is best to fit the VGA camera for 0201 parts make sure your software is high enough..above v1.33 although you can place without but no so good. 0.4mm tapered nozzles are best. 0201 feeder the locator base in increased by aprox 0.3mm and the ind
Electronics Forum | Thu Jul 08 02:32:47 EDT 2010 | tivux
I soldered a wire in the tape press lever of th feeder, so as to create a small gap where the cover tape passes and the component doesn't: in this way the component is pushed down in the pocket as soon as it tries to follow the cover tape. regards,
Electronics Forum | Fri Nov 30 18:27:32 EST 2007 | jmelson
This doesn't help the original poster any, but does the Quad have any sensing of what is going on in the feeder? On the pneumatic or mechanical Philips feeders, if the tape jams in the feeder for some reason, the head just keeps tapping the lever an
Electronics Forum | Fri Mar 28 15:08:37 EDT 2008 | jmelson
Hello, all, I have been having problems with bent push rods on my Philips CSM84. I have caught it a couple times when it happened, but it happens so fast I still don't know exactly what the sequence is that causes this. The push rod is clipping a
Electronics Forum | Mon Apr 02 11:57:08 EDT 2007 | realchunks
Well, I thing mowing his lawn will get your farther, but if you insist.... Fids - Fiducial registration seems to be a bear with most machines. Especially now that most boards are shipped form over seas, the quality is all over the map. Plus the fa
| 1 |
.gif)
