Electronics Forum | Fri Apr 14 13:39:07 EDT 2006 | cyber_wolf
Does the unit come with all of the master jigs and tapes, or do you have to purchase them seperate ?
Electronics Forum | Tue Dec 19 16:20:09 EST 2006 | johnw
Alternative smt sell the best calibration unit on the market
Electronics Forum | Tue Mar 24 14:59:45 EDT 2020 | namcom18
I have a spare Mirae MPS20-TFUIII unit in working order on a scrap machine, does any one know what its worth as I have been offered $1180 for it is that a good price?
Electronics Forum | Wed Jan 06 14:34:20 EST 2010 | ppwlee
Hi, Has anyone have experience with manual soldering iron using automated wire feed? I am looking at poke yoke manual soldering 5 pins LCD and wondering if there are ways to control the volume of the solder applied to the board to minimize missing s
Electronics Forum | Thu Jan 31 08:51:31 EST 2008 | tonyamenson
I just made a more in depth query on the floor and what I thought was one issue is many many issues. We are hadn placing parts that came in bulk instead of tubes, another issue is the vision system won't register teh part corrrectly, another is the
Electronics Forum | Fri Jan 21 00:11:50 EST 2011 | jeffr
Yes you must select FixedTrayFeeder. You must select TEACHING not AUTOSET. The trap is... you must select a TEACHING UNIT prior to doing the teaching (CAMERA-HEAD1-HEAD2)are the choices. Press F8 to get this menu to appear. If the camera cannot reac
Electronics Forum | Mon Dec 05 09:14:14 EST 2022 | peterm
Invoke. The PTF Setup Procedure dialog box displays. 4. Select Product. The Select Product File dialog box displays. 5. Select the same product used in the Open PTF Teach Product section above. 6. Enter the Slot number for the PTF and select Full
Electronics Forum | Thu Aug 26 20:35:33 EDT 2021 | kumarb
Hi. Have the Emerald-X (Yamaha YV88X) unit. Works fine. Using F9 (Teach & Trace), we can position to most locations on the front feeders (not to the extreme left or extreme right due to the head design). Should the unit be able to do the same for t
Electronics Forum | Sat May 28 16:14:04 EDT 2011 | kiss
FOV - Feeder Offline Verification. Kit is generally used with FujiTrax for verification, however it can be used to power up the entire feeder pallet while it sits on the pallet change unit of the M3 or M6.
Electronics Forum | Tue Mar 20 03:55:38 EDT 2018 | rob
MTC = Multi tray changer. It's a stand alone unit that feeds in trays of components - it means you don't sacrifice feeder locations to waffle packs. Different companies call them different things. A 760 is dog slow, and spares are getting harder to
.gif)
winsouce.jpg)