Electronics Forum | Tue Apr 03 08:34:38 EDT 2012 | thanh
REAR, NEXT TO TABLE UP AND DOWN. CHANGE FEEDER SET UP TO FIX TRAY. MAKE SURE YOU HAVE CORRECT NUMBER OF X,Y COMPONENTS IN TRAY AND NUMBER OF TRAY FOR THE PART.
Electronics Forum | Sun Feb 03 07:36:17 EST 2019 | dfl
Hey Steve, I wrote to Bob, but he doesn't reply yet. Digging around, I found these: HANDLING COMPONENT VARIETY The adjustable Pocket Index function enables handling a variety of component tape reels or special component packaging. The following ins
Electronics Forum | Wed Apr 08 04:29:14 EDT 2009 | kircchoffs
Hi Rodrigo, is your problem occurs only at 2nd device table? how about if you transfer the feeders to the 1st device table? if it happens at both device pls your part data if there's a value at pick-up. you can also check the proper data of the de
Electronics Forum | Wed Apr 08 10:19:19 EDT 2009 | cyber_wolf
Go into the program screen at the machine and look at the device offsets. See if there is an offset for the feeder. I have also seen a bug on CP4 machines that is like what you described. Switching to the camera view corrected it. (wide/narrow)
Electronics Forum | Tue Apr 07 12:47:09 EDT 2009 | rodrigo
Hi All, Our CP6-4000 machine has this weird issue that happens once in a blue moon and only on table two. Lets say it is going to pick up a part from feeder 10. Well, it doesn't stop at the right position. It is slightly off so the thing pushing dow
Electronics Forum | Wed Apr 20 11:37:17 EDT 2011 | markhoch
Hello, I'm looking for a supplier for an ESD Cover that I can use to cover my Feeder Tables that are not in use. (I'm thinking of something similar to an ESD Safe BBQ Grill Cover) Does anybody have these, or know where I might be able to find them?
Electronics Forum | Wed Oct 13 09:15:36 EDT 2004 | Tarheel
I am looking for some used Siemens feeder tables. Preferrably the tables that roll for the S-20/S-23 series machines.If anyone finds some them please let me know !!! Thanks......
Electronics Forum | Thu Mar 29 10:29:13 EDT 2007 | Scotceltic
A feeder verification tool like Bartector will stop any need for time wasted manually verifying the correct part to the correct feeder. Also, there are plenty of pieces of SMT placement equipment out there that offer offline feeder pallet tables that
Electronics Forum | Mon May 14 16:39:38 EDT 2001 | T.F.
Siemens makes feeder hold down brackets for the F5 that does prevent the operator from leaving the feeder in a position that can cause a crash. The brackets attach to the feeder table so you need one bracket per table. The part part number for the b
Electronics Forum | Tue May 31 11:50:22 EDT 2005 | Stefan
There is quite some difference with a fixed head versus a head mounted to a X/Y gantry. If the head can move, feeder tables and board are fixed. If the head is fixed, feeder tables and board have to move. Spinning a component around on a vacuum nozz
