Electronics Forum | Sun Feb 03 08:46:34 EST 2019 | dfl
SOLVED The LED/phototransistor was a little of the center on the "index wheel" (don't know a better name, its the gear that pulls the component strip). The wheel works with a LED from one side and a phototransistor from the other, through a hole on
Electronics Forum | Thu Apr 22 05:16:44 EDT 1999 | Ross Clunie
To save me re-inventing the wheel can anybody tell me an average no of pick-ups that can be expected from a Panasonic MV feeder before Feeder TPM should be carried out. Thankyou.
Electronics Forum | Thu Jan 31 07:55:04 EST 2008 | tonyamenson
I noticed on the floor that workers hand place some SMT parts becuase some parts that came in a tube (instead of on a reel) do not fit properly into the tube feeders. The tubes dont align properly in the feeders becuase of their size. Are there any
Electronics Forum | Fri Jan 13 09:48:27 EST 2017 | westshoredesign
10mins to print an 8mm wheel. Experimenting with both Ninja Flex, and Ninja Semi-Flex, I think the Flex is probably going to be the winner though. Had to upgrade our filament feeder on the printer to use either of them. Totally worth it though. Not s
Electronics Forum | Thu Apr 22 11:11:44 EDT 1999 | Jimmy Strain
| To save me re-inventing the wheel can anybody tell me an average no of pick-ups that can be expected from a Panasonic MV feeder before Feeder TPM should be carried out. | | Thankyou. | What size? An 8x4 is going to index a lot more times than 32x
Electronics Forum | Fri Apr 23 00:50:06 EDT 1999 | KEVIN SIMPSON
| | To save me re-inventing the wheel can anybody tell me an average no of pick-ups that can be expected from a Panasonic MV feeder before Feeder TPM should be carried out. | | | | Thankyou. | | | What size? An 8x4 is going to index a lot more time
Electronics Forum | Wed Dec 02 14:33:12 EST 1998 | fuji god
| Our CP feeder take up reels often break,The glue in tabs | are a pain and replacement is expensive.Any solution? | Be sure that you are using the correct take up wheel with the correct feeder. There are two distinct types of take up wheels, one
Electronics Forum | Thu Mar 14 17:35:39 EDT 2013 | dontfeedphils
Have you looked at the cover tape wheel on these different feeders and made sure that they are turning correctly when the feeder is advanced? There's not too many things that could be wrong, either the wheel isn't turning properly and keeping the co
Electronics Forum | Thu Oct 12 12:51:39 EDT 2006 | john_smith
Hey Brian how are you doing? We also have one of these feeders and it works great! The best feature is the being able to reverse the feed wheel to backfeed parts. Just talked to the guys at Hover-Davis yesterday and they have had feeders in service
Electronics Forum | Thu Jul 28 18:57:49 EDT 2005 | donb
Hi All, Can anyone tell me if it's possible to change just the ratchet wheel on a Fuji 8x4 feeder to make it 8x2 so we can run 0402 chips, or would we need to change other parts in the feeders as well?
