Electronics Forum | Fri Jan 09 04:37:13 EST 2015 | jsolloway
Hi Jeff, We have both a MY500 (4 years) and a 600 (8 months) and were the first in the UK to have both. They work well for us, enough so that we no longer use a stencil printer. Like yourselves we are a high mix CEM we make about 500 different part
Electronics Forum | Fri May 22 12:42:43 EDT 2015 | deanm
Sr. Tech, you are right in that there is no verification of the profile. We are a Class 3 high mix OEM. We have visual inspection after SMT. We have not seen problems with wetting, grainy solder, cold solder, charred boards, etc. that would indicate
Electronics Forum | Wed Mar 04 12:51:41 EST 2020 | bk
That error means your hydra z did not reach it's specified position. With the machine on you should be able to manually push the hydra down and let it come back up. Make sure it isn't being held up or hitting anything as goes down. Lots of times a pa
Electronics Forum | Sun Aug 30 17:31:15 EDT 2020 | kylehunter
Hi all, (I posted on eevblog also, figured I'd try hear as well since this seems like a semi "niche" question) I need some advice on PCB cleaning. Up to this point, our assembly line has strictly run NC paste, with all SMT parts. We never washed an
Electronics Forum | Wed Sep 01 02:24:28 EDT 2021 | sophyluo1985
Dear Sir, I'm very sorry to hear this news. We can understand your feelings now. We are an SMT wholesaler from China. We know that you may not trust Chinese suppliers now, but not every Chinese supplier. This is the case, we have no other meaning, ju
Electronics Forum | Thu Aug 17 07:53:31 EDT 2000 | Wolfgang Busko
Getting things "foolproof" is sometimes a hard effort and can cost a lot of money. Who is able to tell that it actually saves money instead of wasting it. Transfering responsibility from operators to a system may lead to a somewhat less responsible a
Electronics Forum | Thu Jan 13 07:29:49 EST 2005 | Grant
Hi, It's both really, and we are doing higher volume of current products, but new products are increasing in component count, mostly passives. We have analog on our products, and this uses a lot of passives, plus each semiconductor needs decoupling
Electronics Forum | Mon Feb 16 12:33:58 EST 2015 | ianatvadatech
Hey Syed, I've been running the MV-9 for just over a year. We shopped around very extensively (two APEX shows) before switching from yestech to mirtec and we bought two of the best systems they had to cover the four lines we run. Two systems are fa
Electronics Forum | Mon Jun 29 15:45:20 EDT 2020 | spoiltforchoice
Yeah my issue with the CLM945 type single slot feeders used for parts over 6mm is they index forwards using a tiny servo attached to some gears that pull on the cover tape. A system that begs to fail, the tape can stretch, the gears can start grabbin
Electronics Forum | Sat Feb 12 10:15:40 EST 2000 | Rick Thompson
I have to agree with Michael's comments. We've been evaluating systems for a month or so. There's a pretty wide range depending on what you're looking for. I'd say the first thing needed is to define your expectations. Are you looking for solder in