Electronics Forum | Thu Aug 16 14:25:17 EDT 2007 | doug
Hello Angie, Have a look at http://www.focalspot.com... FocalSpot, Inc. is recognized worldwide as a leader in the design and manufacture of affordable high-quality x-ray inspection systems. FocalSpot also sells, reconditions and supports pre-owne
Electronics Forum | Tue Oct 10 15:14:43 EDT 2006 | mfoster
Hi Phil, Most parts are still available for the Quad/Samsung QSA-30, through Dynatech (in North America). It is actually a single gantry, 3 spindle machine with rated speed of 14,000 cph. As with any used machine, it could be a great deal or a not
Electronics Forum | Mon Jan 29 15:49:08 EST 2007 | rmitchell
Hi, Our Fuji CP65 nozzles are jamming in the up position. Mostly on caps and resistors, the .7mm (0402) and 1.0mm (0805) and 1.3mm (1206) sizes. They seem to be catching internally where the little peg slides down the slot. If you twist them they
Electronics Forum | Fri Dec 21 04:05:19 EST 2007 | muarty
For the money I don't believe you could pick up a better machine. Especially if you are only planning to use it as a Chip Shooter. Buying 2nd hand I would strongly advise that you have the machine Health Checked prior to purchasing it. The machines a
Electronics Forum | Tue Mar 04 03:55:11 EST 2008 | aj
Hi All, I know this forum is not for spare parts but after the shock I got when I received a quote for a new CP6 nozzle head, I feel that some other company without much cash might benefit. I purchased some fuji cp4 & cp6 spares from a 2nd user dea
Electronics Forum | Thu Mar 27 16:40:45 EDT 2008 | slthomas
(or just some static-safe foam tape) I need to seal a wire terminal block to a board for conformal coating purposes. Currently we glue it to a shim and glue the shim to the board (yuck), but I want to use die cut gaskets if I can make it cost effec
Electronics Forum | Fri Jul 11 11:14:30 EDT 2008 | bkreiman
I agree that it should be a non-issue considering that the primary purpose of a solder joint is to electrically connect the lead to the board. However, there are some here that think these leads should be touched up because this part is a power jack
Electronics Forum | Mon Jan 04 21:03:22 EST 2010 | cman
1) I'm not familiar with the acronym CAF. Could you spell that one out for me? 2)Why do you feel they need to be baked? Are they in a high humidity enviornment? the only time we bake is when we are dealing with moisture sensitive components. Do you b
Electronics Forum | Thu Apr 14 04:55:21 EDT 2011 | don7888
Hi I have produced a spreadsheet that helps to plan production for SMT Jobs its very much a prototype and my Excel skills are not the best but I would appreciate if people could look over it and offer improvements. It currently operates using only I
Electronics Forum | Tue Jul 03 16:59:18 EDT 2012 | dontfeedphils
Reflowing a BGA can be a reliable and long term fix, but it has to be done correclty, and using a heat gun and going in circles around the part is definitly not the right way to do it. To do it correctly you would flux under the bga, use a rework st
.png)
