Electronics Forum | Wed Apr 11 20:49:39 EDT 2007 | raychamp007
3W. Figure 8-84 shown evidence of heel bend wetting(but no written criteria mention about the solder fillet must present at the heel bend). It is acceptable if the minimum D(3W/75%L)extend from toe which is no evidence of solder fillet at heel bend?
Electronics Forum | Mon Aug 22 06:30:59 EDT 2011 | janz
very often toes on the QFP packages are exposed to base material and during time they oxidize. That is why you can have problem with solder fillet. Most important is heel fillet. Regarding your misalignment of IC if this is repeatable check your pl
Electronics Forum | Sat Aug 25 23:01:45 EDT 2012 | ssridhar
Hello jdumont, I think the spheres are leaning as there is not enough meat under the spheres. In ceramic BGA devices there is a solder fillet which is generally a solder paste which is used to give the device some height before balling it. This heig
Electronics Forum | Wed Aug 07 16:33:08 EDT 2013 | rway
I did not see the histogram image (didn't scroll down). My point about the flat metal surfaces is they should have a large white total under top-light with red filter. You should be able to distinguish between the two (fillets and no fillets). I k
Electronics Forum | Mon Dec 21 09:53:12 EST 2015 | proceng1
What part do you think is a defect? You can see by the board that the two leads are electrically connected anyway. If you mean that the outside fillet on the right is shorter, just look at the board. It looks like you have solder mask encroaching
Electronics Forum | Wed Dec 02 16:35:21 EST 2020 | kylehunter
> Hi Kyle, As per IPC 610, for class 3, this is > not acceptable, as your minimum fillet height has > to be either one of these two, whichever is > less: - solder thickness + 25% of the termination > height - solder thickness + 0.
Electronics Forum | Thu Oct 26 12:36:02 EDT 2000 | Sal
Guys! witnessing a problem i've never seen before.Manufacturing a mixed technology with HASL finish, BGA,QFP's,fuses etc..etc. I've profiled the product, but what i'm witnessing is really weird. I've got a 0.020" QFP which is at the edge of the board
Electronics Forum | Wed Jun 12 11:26:50 EDT 2002 | pjc
Sean, Have you contacted Speedline Technologies applications enegineers? They have a lot of knowledge about SPOTT working with customers over the years to develop the process. I myself have experience doing SPOTT. I used Fuji GSP2 printers with overs
Electronics Forum | Wed Mar 21 20:40:28 EST 2001 | dblsixes
We are building a monster ... Dimensions are 10" x 7" ... 12 layers ... A Logic Assembly with a Power Supply all rolled into one ... The Power Supply is in one section of the board, the logic in the other section ... The Power Supply obviously has a
Electronics Forum | Fri Jun 12 14:22:53 EDT 1998 | Ryan Jennens
| Hey all! | The wave solder warrior is back. I have found a flux which leave almost no residue (the least yet), but because of its super low solids content I absolutely cannot get topside fillets. The multi-layer, two sided board is on a pall
.gif)
