Electronics Forum | Mon Aug 16 14:43:44 EDT 2010 | dan_ems
Hello, i don't know if is possible to dispense paste but for reduction of cost we use a diferent type of stencils, from aluminium of 0,2 mm, purchased from a typography of newspapers. Ofcourse the pcb for what we use this stencil are simple. But th
Electronics Forum | Mon Aug 16 20:50:05 EDT 2010 | adhesivedispenser
CiXi Tian Hao Electric Technic Co.,LTD manufactures adhesive dispensing equipment and may be able to offer assistance with your application. Check out our product information at http://dispensing-th.com. We manufacture dispensing equipment ranging fr
Electronics Forum | Sat Aug 21 02:27:21 EDT 2010 | isd_jwendell
The paste you dispense will not solder the same as the one you use with a stencil. The paste for the stencil will have a higher metal content. I was not working with dispensing as small as you are, but after evaluating the cost of the stencil vs. lon
Electronics Forum | Tue Dec 11 11:59:00 EST 2012 | sarason
The issue is surface tension around the connector. Your tip needs to have more surface tension than the pins of the connector as it forms a cluster when being soldered. When I used to solder superfine connectors with a metcal iron it had a horses hoa
Electronics Forum | Mon Aug 23 10:11:55 EDT 2010 | flipit
Hi, I have never been able to find an acceptable dispense process for dispensing small dots of solder paste. I currently have an auger screw automated dispense system and can not accomplish 0.010" dot sizes. In addition, stencil printing is much m
Electronics Forum | Tue Dec 11 12:29:57 EST 2012 | deanm
Thanks for the comments so far. The smallest nozzle I've tried is a 4mm, which is what Pillarhouse used on this board to provide a sample. I tried this but wasn't as good as the 6mm. I've soldered the same connectors on a different board using a 10mm
Electronics Forum | Tue Sep 26 09:27:10 EDT 2000 | Chris May
LarryK, It all depends upon your volume / problem. As Jax says, if this is a repeating problemo, get QA & Purchasing involved. Is it your stores ? Do they receive 100 off and "decant" 20 into a tube (manual handling error, training etc;). From your
Electronics Forum | Thu Sep 19 11:14:45 EDT 2002 | Jim M.
We had lots of problems with bridging on 15.8mm pitch, QFP17-160 at the start.The board was .032 thick, double sided-six boards to a panel. Here is the problems (not neccessarily in the biggest to little but as i remember them) and solutions that he
Electronics Forum | Tue Jun 13 16:45:30 EDT 2006 | adlsmt
If the only difference is the layer count, check the profile as stated above. If you dont have a profiler you can probably get the local Kic or Mole rep to do a demo on that board. I believe I was the one who stated in an old post that prying the lea
Electronics Forum | Fri Jun 09 05:18:07 EDT 2006 | Rob
Hi Shawn, that you're baking the components makes me think that they are either old, or have been sitting around for a while (or none of the above & you are really dilligent!) Whilst baking will sort out the MSD issues (such as popcorning) it will