Electronics Forum | Sat Sep 08 16:02:44 EDT 2012 | processman
hi, We have a strange issue with a DEK 265 Lt, it powers up and initialises fine. Camera LED`s flash, cognex card intitialises with no error. The issue is we have no fiducial recognition or image on the monitor. Have swapped out camera, cogn
Electronics Forum | Tue Sep 25 05:58:16 EDT 2012 | bobpan
I believe the Led's should flash 3 times when the card is booting up/ powering up normally. There was no board troubleshooting back in the day and we just replaced the card. Make sure the metal cover is grounded to the machine.....this sometimes caus
Electronics Forum | Fri Feb 01 05:18:59 EST 2013 | eniac
If you have a hard-gold on your pads, it's not a problem. Hard gold can give to you 4 or 5 times for PCB soldering (BGA repair). Soft gold (or flash-gold) can destruct, after that will start a migration of nickel up through gold, your pads will be
Electronics Forum | Thu Feb 14 17:00:42 EST 2013 | richardc
I am trying to use Mydata TM8C feeders that work fine on a TP93 running 1.6.18 TPsys but are not recognized by a TP94 machine running 1.4.7 TPsys. I get a green flashing light instead of a solid green. I can initialize the hardware but can not proc
Electronics Forum | Thu Jul 31 15:01:53 EDT 2014 | rgduval
Give Heller's service department a call. They're great about helping, even with third-party machines (at least, they were three years ago when I used to use them a lot for my own third-party machine). Cheers, ..rob
Electronics Forum | Thu Aug 07 13:58:01 EDT 2014 | patel_daxa29
Hi All, I have generated Pick and place file from ALtium designer.I put it on flash drive and it is plugged in MY-DATA. How do i access this file in TPSYS. I will appreciate any insight. Thank You
Electronics Forum | Thu Nov 12 10:16:25 EST 2015 | goodting
Good day. I am asking if anyone knows how to access/have a copy of our BIOS file. This BIOS file which was designed by Phoenix , called biosrec.zip. Each day, we used the main EPC-1316(PCA,CPU/PMC)card to boot our Advantis machine; but the speciali
Electronics Forum | Thu Jun 08 09:43:42 EDT 2017 | davef
You know the scary part about your mentioning a tread where I post something? Well. let's just say that 2007 was a long time ago. Anyhow, silver will dissolve into your solder and provide no barrier. Some people apply a silver flash plating over the
Electronics Forum | Tue May 28 12:56:22 EDT 2019 | dekhead
It is a communications failure between the CPU and the Cognex card. Does comms initiate between the 2 cards (flashing green on both)? or does it immediately come up red LED on Cognex? Have you reseated the CPU board as well as the Cognex? Is this a s
Electronics Forum | Wed Oct 13 15:41:31 EDT 2021 | dilogic
Aside from BIOS settings for the drive, there's another page with EXM settings (that's the interface your EXM-9 board is using). You have to configure it right in order to get the system running. See attached document where settings are explained - r