Electronics Forum | Tue Jul 12 08:54:34 EDT 2016 | leeg
well there you go. I found that trying > different values in the "Placing Stroke" had a > big effect. I changed it to 2mm and it placed > them well, but I could see the board also flexing > a little, went to 1mm and the problem came back, > so
Electronics Forum | Mon Nov 19 06:34:33 EST 2018 | davechow
Hi Clayton As I know Icap is a trading company for PCB,and it is not Chinese company. If you need PCBs,please contact me(e-mail:445320233@qq.com) Flex-rigid board up to 20 layer,FPC board up to 8 layer,rigid multilayer up to 32-layer and HDI 2-steps,
Electronics Forum | Fri Aug 10 16:01:51 EDT 2018 | ks0707
Hi Thomas, Thank you for your advice. BTW, unfortunately, I received negative answer from the Fixture house same as below. =========== We have an issue here. Your board is too thin. It is fine to make the fixture for first side. But when you run
Electronics Forum | Thu Oct 17 11:35:55 EDT 2019 | tey422
It's the printing part that's the most challenge, right? You can print it correctly, then you should able to run it with PnP. You might need to have one "print" fixture only for screen printing, then transfer the printed board to SMT fixtures which
Electronics Forum | Thu Jan 30 07:09:34 EST 2020 | jineshjpr
Hi All, I'm using 8 zone reflow for ROHS 0.2mm Thick PCB soldering, but Micro BGA shows voids more than 25%. Is there anybody can suggest for better solder profile. paste- aim m8, SAC 305, T4, Soaking (150-200) - tried 90s, 60s, 45s; TAL (>217)-
Electronics Forum | Thu Jan 07 19:38:12 EST 2021 | ttheis
Hi Deni, I just bought a machine with FJ9 heads- I have never had a flexjet, only regular flex heads. Are there any pointers you can share? What ended up being your problem? When you do a calibration, do you do the CPE also? I have been fortunate
Electronics Forum | Wed Feb 10 00:25:16 EST 2021 | ttheis
My company has a line with two GSM1 machines. We are planning a second line and considering the Advantis AC-72 or AC-30 models but I have a few questions I was hoping someone could chime in on. 1. Are the GSM feeders capable of being used on the Adv
Electronics Forum | Wed Feb 10 14:33:40 EST 2021 | lewis_and_clark
Hi Tom, Spoke with our technical team and our feeder division tells me that the GSM Pneumatic feeders are not compatible with the Advantis Machines, however the Multi Pitch 24 Volt Feeders are. We have a large customer base that uses the Advantis m
Electronics Forum | Mon Sep 20 20:43:19 EDT 2021 | ttheis
One of our GSM machines started having an issue with "spitting" parts onto the board / blowing them around. I determined the problem be that spindle #2 on our flex head is not touching the parts all the way down to the board. It is stopping just abov
Electronics Forum | Wed May 04 19:38:57 EDT 2022 | mikevb
I have a used MyData My9 machine that I've picked up recently and it has a problem with initializing that I can't figure out. It just gives an error stating "no z indicator value at all". I've replaced the flex board with the force sensors but that d
