Electronics Forum | Tue Jul 02 11:36:41 EDT 2019 | ravivarman82
Try standardize Flexa versions on all your clients and server .
Electronics Forum | Tue Jul 02 12:16:09 EDT 2019 | dman97
Yes we had the same problems with Flexa and our AIMEX 3. Fuji techs came in and upgraded all our software to version 6.24.0.1. This solved almost all the communication problems between server and client computers.
Electronics Forum | Tue Apr 10 11:40:52 EDT 2018 | assuredtech
Are you using Flexa? If so what REV are you using? Needs to be 6.XXX Ed
Electronics Forum | Tue Jul 02 10:37:36 EDT 2019 | dman97
I also forgot to add that if the proper data was not generated by flexa for the CP6, then flexa will not communicate with the machine. You need to flush the proper and resend using flexa for the communications to work correcty. Good luck!
Electronics Forum | Fri Jul 19 11:02:15 EDT 2019 | dman97
You never answered my question on the proper data. Do you have a hard copy of the proper data? Is the diskette (if you have it) in Fuji Flexa format? In order for flexa to communicate with the CP6, you must have the correct proper data.
Electronics Forum | Fri Jul 19 11:16:21 EDT 2019 | dman97
And yes if the proper data is not correct it will give you a error message because Flexa cannot communicate with the CP6.
Electronics Forum | Fri Jul 19 11:11:38 EDT 2019 | dman97
Have you imported the proper data into flexa yet?
Electronics Forum | Thu Mar 12 00:32:12 EDT 2015 | mdang
I am setting Fuji Flexa to communicate with CP8 machine. When I create a new machine, I has to fill out the following value Machine Communication Server: ? Get Production Data : (yes/no) GEM Host Name: ? Disable GEM : (Yes/no) TCP/IP Port #: ? I c
Electronics Forum | Fri Mar 13 10:24:35 EDT 2015 | assuredtech
I am setting Fuji Flexa to communicate with CP8 > machine. When I create a new machine, I has to > fill out the following value Machine > Communication Server: ? Get Production Data : > (yes/no) GEM Host Name: ? Disable GEM : > (Yes/no) TCP/IP
Electronics Forum | Tue Jun 25 09:48:56 EDT 2019 | andrewpayonk
I remember seeing a diagram, it actually only uses like 3 wires
