Electronics Forum | Fri Mar 29 10:11:02 EDT 2019 | cyber_wolf
“For a number of years now, work has been proceeding in order to bring perfection to the crudely conceived idea of a transmission that would not only supply inverse reactive current for use in unilateral phase detractors, but would also be capable of
Electronics Forum | Wed May 16 15:40:56 EDT 2012 | davef
Here's some notes from a Bob Willis presentation Assembly of Flexible Circuits with Lead-Free Solder Alloy [Bob Willis leadfreesoldering.com] * Flexible Circuit Construction ** Base Material - 0.05mm Copper 18/18 um ESPANEX from Holders Technologies
Electronics Forum | Thu Aug 19 15:49:05 EDT 2004 | pjc
Hi Erhard, Go to http://www.globalstencil.com They are the stencil firm that worked with MPM for developing technology for printing with thick stencils that are milled out on the bottom to account for existing components on the top side of a PC boa
Electronics Forum | Thu Jun 21 22:04:18 EDT 2001 | davef
This is my attempt at beating the "Fuzzburg 7" translator used on the SMTnet Forum that mashes everything it sees. Below the next paragraph are three paragraphs,each with a common numering sequence, where each paragraph represents the columns of a t
Electronics Forum | Wed Jul 27 09:58:05 EDT 2011 | davef
Pressure printing systems Conventional stencil printing techniques have fundamental limitations as regards paste handling: The volume of paste available for printing is limited, so frequent replenishment is necessary Paste is difficult to c
Electronics Forum | Mon May 07 16:07:05 EDT 2012 | davef
Start with targets based on the stencil thickness (for height) and stencil thickness times the aperture size (for volume). * Set reasonable upper and lower control limits (+ 25% and –25 % of the targets, for example). * Next, check the printer set-u
Electronics Forum | Mon Jan 28 16:48:14 EST 2002 | djarvis
Printing with adhesives is no big deal so don't let the sales types try to mystify the process and convince you that they have the only stencils/adhesives/knowledge that can possibly get you through this "trying time" - at a price. Start with 0.010"
Electronics Forum | Tue Apr 09 16:19:37 EDT 2002 | Peter L.
Has anyone built using the ALIVH PCB (0402, 0.8mm pitch uBGA) on the SMT line? I would like to know any process issues (paste printing, p&p, reflow) related to processing this pcb. Specifically, what type of solder paste was used (no clean) and wha
Electronics Forum | Wed Jun 01 07:34:19 EDT 2005 | davef
It's unusual to use a horseshoe shaped pad for a 0805. Commonly when people want to reduce the paste volume to reduce solder balling, they print a "home plate" aperature. We print paste 1:1 with the pad. �IPC-7351 LP Wizard� is the library mainten
Electronics Forum | Wed Apr 14 08:15:18 EDT 2004 | arcandspark
We have tried other stencils with different size openings but this company will not allow us time or money to run any experiments to define stencil criteria and printer settings, its just run, run, run. They really dont care about post reflow yields.
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
