Electronics Forum | Tue Jun 26 10:23:43 EDT 2018 | ilavu
This video does not show FlexJet head, It is Flex head with 4 spindle. We have about 5 GSM with flex and FlexJet head with OS/2 and 4 with Windows2K. If you need any help, I will be glad to help you. Tushar
Electronics Forum | Fri Jan 16 15:46:07 EST 2015 | comatose
We did 0402s for years on a GSM. Is this a flexjet or a 4 spindle head? A flexjet is easy with 0402s. The four spindle nozzles are big, you run into issues with knocking already places parts and having to Z zone carefully (and beware repair cycles.)
Electronics Forum | Sat Oct 10 16:05:27 EDT 2009 | dilogic
I would if someone can share his "real-life" experience with FlexJet (7-spindle) heads. We are currently running machines with Flex heads (4-spindle), which are very easy to maintain, but I suppose 7-spindle has more throughput. All comments are welc
Electronics Forum | Fri Dec 09 11:21:52 EST 2016 | ilavu
I have one GSM2 with Flexjet on both beam. I want to replace one beam with Flex head to get more flexibility. My machine is equip with ULC in both front and rear. Also, it is OS/2 with 4.5 software. I do have one working Flex head that can be use. I
Electronics Forum | Sun Mar 04 01:56:37 EST 2012 | eadthem
What we have had recently is a lot of larger thin (32 thou) thickness boards that have had issues with SC90 diodes bouncing off the pads in the final PNP machine. Our setup, universal instruments GC120 or quad beam 30 spindle lightning heads. This m
Electronics Forum | Wed Aug 02 01:55:34 EDT 2023 | ttheis
The issue ended up being the nozzle changer; Andy from 4tech noticed that the changer was rising unevenly when he measured it in the raised position from the frame rail. He disassembled and cleaned the changer mechanism and the issue was resolved wit
Electronics Forum | Thu Sep 29 13:36:14 EDT 2022 | poly
I have almost got my new (to me) SMT line working. My GC 30 appears to be working fine, and the high force 4 spindle head on the GX11S works. However the Flexjet 3 head picks up parts correctly but gives me a message saying nozzle collision detected.
Electronics Forum | Tue May 15 21:44:35 EDT 2007 | marcelll
The best buy you can do right now. There's a lot on the market at cheap price. Easy to find feeders & spare parts at good price. You can find a good machine for $20-25K Dont buy with FlexJet head unless your use to work with these heads. Complicated
Electronics Forum | Sun May 04 20:11:53 EDT 2008 | marcelll
I'm working on a regular base with Advantis. There's nothing special regarding maintenance with the machine itself, only standard greasing & cleaning each 3-4 months. An hour or two maximum. If you have lightning head on it, it's maintenance free. I
Electronics Forum | Fri Sep 23 09:53:33 EDT 2005 | PWH
Thanks all for the opinions. Our shuttle/GSM1/PTF install was done by an ex-UIC engineer. Have never utilized shuttle so appreciate the advice on pros and cons of it all. We have 1.0 mil on PTF side and 4.0 on shuttle side. C4 head on both sides
winsouce.jpg)
