Electronics Forum | Thu Apr 26 12:06:08 EDT 2007 | basem
$100K for this entire line. We are thinking of getting a Chinese made reflow oven that looks pretty good at $25K. Also, we need to deposit solder using a dispenser as stencil printing will be reserved only for higher volume boards. It will not be pra
Electronics Forum | Fri Apr 27 12:38:40 EDT 2007 | Cal
Basem, I worked directly with both Essemtec and Dima and if you send me an email I can help provide direction. cal_Driscoll@hotmail.com Unfortunately,I have been out of the SMT world for almost 4 years now. I would lean more towrds the Essemtec as
Electronics Forum | Fri Feb 04 09:23:21 EST 2000 | Casimir Budzinski
If No-Clean flux does not need to be cleaned, then why do I get readings of up to 27(ug NaCl/sq in) on boards that are not washed, up to 23.4(ug NaCl/sq in) on boards washed with DI water only and from 1.2 to 10.1(ug NaCl/sq in) on boards washed with
Electronics Forum | Wed May 19 16:57:08 EDT 2004 | ricardof
We have in our facilities in Mexico more than 150 FUJI machines (CPs, IPs, QPs, GPs), they're in fact Bombproof, but it is not amazing to do that with 1206, SOTs on SOPs, we just feel a kind of disappointed with that 10K hours service, that means yo
Electronics Forum | Wed Jun 02 17:11:48 EDT 2004 | bpan
Quad 4c's would be a great machine for what you are looking for. They are easy to learn for an smt machine and very reliable. Just realize that when you buy a machine that is no longer being improved...you can run into limitations. Those machines are
Electronics Forum | Tue Jun 08 22:20:17 EDT 2004 | Don
Dr. Lou, I wouldn't recommend the Quad QSP series. A stated before it's old tech, and the feeders are junk. If your looking at Tyco (Quad), they have a new Mirae 1025P platform. It's very competitive performance/price against Assembleon and the li
Electronics Forum | Thu May 22 12:32:35 EDT 2008 | tonyamenson
So here is my problem with the info you gave. If my preheat topside max is 150 - 170 C but my flux calls out a topside temp of 93 - 104 C..... ....Im pretty much up a creek becuase of a poor flux choice? FYI. we are using the Indium 3590-TX for bo
Electronics Forum | Wed Apr 21 14:32:52 EDT 2010 | remullis
These ovens maintain good profiling as long as you stay on top of maintenance. I had 4 150's and 1 125. The biggest headache is keep the plenums cleaned (very messy). Also the blower motors have been replaced a few times on them as well. If I were yo
Electronics Forum | Fri Jan 16 16:57:14 EST 2015 | dilogic
I doubt you will be able to get satisfactory results with 0201. 0402 is another story. When doing 0402 projects, we use only electric (MP) feeders and always at the same feeder slots (feeder teach done for each of them). MPF08 nozzle works fine. Also
Electronics Forum | Mon Jan 18 02:49:03 EST 2016 | nirmex
1-Machine speed. 2-New Head H24 and DYNA Head. 3-New Feeder type W08f 4-New Part Camera. 5-New Y-Axis Flat cable design. 6-New GUI with Touch Screen. 7-Panel Height detection. 8-Feeder raising detection. 9-NPI tools support. 10-Overall machi
.gif)
