Electronics Forum | Fri Jan 07 09:23:16 EST 2011 | ercdave1
I removed the front cover of the controller box and found a cable secured to the right plate with cable ties but no floppy. the cable has a 50 pin connector. maybe is an option on your machine that my didnt get. I hope tom has better luck. I am goin
Electronics Forum | Sat Jan 08 07:28:19 EST 2011 | jeffr
David, If you have no floppy drive, then your machine is a pre 1990 or earlier machine. (Not CSM84VZ). These machines have a RAM memory with 14 programs max. Can you verify this for me with a picture of the inside of the front of the controler. (jr@h
Electronics Forum | Wed May 16 12:53:26 EDT 2012 | deanm
CS-400C: As with anything, once you are up on the learning curve its really not that bad. The "E" machines should be easier due to the touchscreen and the floppies are PC compatible unlike the "C" and "D". There are third party software providers tha
Electronics Forum | Tue Nov 17 07:37:19 EST 2015 | micropak
Hello I got a SiPlace 80-S20 machine which had a damaged hard drive in MC. I changed HDD and re-installed RMOS + MC from floppies. Then I turned on the machine (without any Line Computer). The software on Station computer wouldn't go past the "Soft
Electronics Forum | Thu Mar 07 12:41:31 EST 2019 | rodrigo
Hi all, Our MCS30 hasn't been used for years because we use F4G now. Today I went to power up MCS30 because I need to transfer to F4G an old program but MSC30 is not working. It said all boot devices failed. We found a dead backup battery in one of t
Electronics Forum | Thu Apr 04 12:52:48 EDT 2019 | rodrigo
Hi, Our MCS30 had a bad backup battery in one of the boards. After changing the battery I got the all boot devices failed error. I managed to get a hold of some boot floppy disks and I can use disk1 to boot the MCS30 to a "$" prompt. I also have a di
Electronics Forum | Wed Nov 20 15:03:27 EST 2019 | richardcargill
If you've formatted the pcmcia / CF card then it'll be blank and have no DOS or anything as it acts as the hard drive for the machine. A DOS diskette formatted with /S will boot from the floppy drive, then allowing software installation with the orig
Electronics Forum | Wed May 13 00:52:36 EDT 2020 | gabriel1blue
I need help. I have a old panasert MV2C pick and place machine that was working great until we had to shut down due to the Covid-19 pandemic, and now everything is off. We had the system data saved but even after we restored everything from Japanese
Electronics Forum | Tue May 09 14:30:47 EDT 2023 | gwideman
I realize this request is an incredible longshot, but... Anybody happen to know the initial default username and password for ERSAsoft 2.1? We have a hard-working antique Hotflow 3, and decided to try setting up ERSAsoft for it. Comes on two floppi
Electronics Forum | Thu Sep 16 06:13:17 EDT 1999 | Wendy Casker
| For the record, the problem was related to a bad floppy disk resulting a corrupted dll file. Microsoft Windows 98 did a poor job of recovering from a bad dll. The dll was removed, QSoft re-installed, and all is running well. | | Times change Ear
