Electronics Forum | Tue Oct 12 15:15:14 EDT 2021 | astarotf
Hello there I am having difficulty starting the GSM2 4688A machine, the operating system does not start and does not read the hard disk. Procedures that we have carried out: 1. We validate the hard drive, it is mounted on an external computer and it
Electronics Forum | Mon Feb 07 08:26:38 EST 2022 | micropak
So you only rebuilt the MC HDD and didn't rebuild the Station PC? Am I right ? The Installer Floppy disks for MC software will install a default IP address and the Node Name. You have to change not only the IP addresses (in HOSTS file) but also the
Electronics Forum | Wed Aug 10 09:56:09 EDT 2022 | jojoled
Hi guys, from certain time (not sure, but it could be power down last week) none of the 2 heads can succesfully pickup nozzle from ATC (after startup calibration is done, but in the calibration sequence the ATC height is not measured, it just calibra
Electronics Forum | Thu Mar 29 20:15:41 EDT 2007 | darby
PCB > Origin > Origin 0 4 Teach the corner of the pcb at the mechanical stop. This data is from the machine origin. For a unit with a teach camera it will probably be around -25x, 95y. For a beam sensor around 70x, 28y. This is for a right to left
Electronics Forum | Tue Feb 22 22:39:22 EST 2022 | cirsol
Hi, Sorry I didn't see your previous post. I do have an update but will answer your questions first. {So you only rebuilt the MC HDD and didn't rebuild the Station PC? Am I right ?} Yes that's correct, we only rebuilt the MC HDD but were not able t
Electronics Forum | Mon Jan 14 15:41:41 EST 2002 | gdstanton
MyData packages may be exported in ASCII format with a 3 1/2" floppy. Select Utility, Export, Package, DOS-Diskette, Choose Single or ALL packages, Select Package with Data. The resulting file should look something like this: # *** PACKAGES *** P00
Electronics Forum | Fri Sep 19 10:35:56 EDT 2008 | mi
No, I don't have Panapro at all. Some Mydata files I've exported end in: *.cmp & *.gen Files saved on floppy from Panasonic MSH II end in: *.MNG, *.POS, *.SET Panasonic program filenames come out as: CF000000.POS CF000001.POS ... Sample quote of
Electronics Forum | Thu Mar 25 09:38:36 EDT 2021 | spoiltforchoice
Well everything Graham said with some additional points.. You mention manual printing but very little about your stencil or setup. Everything you have said indicates a very limited budget has been expended, however what you have is an extreme exampl
Electronics Forum | Thu Dec 09 04:11:54 EST 2021 | cirsol
Hello Forumers, I'm hoping there might be a SiPlace expert or two trawling the forum. We have an S25 machine that essentially has a failed MC harddrive and we're trying to rebuild a new one. Attached are a few images and perhaps something shown her