Electronics Forum | Thu Sep 02 15:45:35 EDT 2004 | russ
We don't do any wave, SMT only. We did not have to change apertures for lead free, we use the same stencil that we did when we ran water soluble with pb. This I think might be dependant upon your current design of both pad and apertures however.
Electronics Forum | Thu Dec 09 09:51:34 EST 2004 | russ
One of the things that I have found is the "benchtop/lab" type waves (Low cost) do not perform very well except on the simplest of products, they are lacking critical design elements such as adequate preheat length, laminar flow nozzle design, etc.
Electronics Forum | Thu Feb 19 13:39:51 EST 2009 | tedel
Yes, I called Fuji as well!! I guess we're all in the wrong buisness... Received a reply from Biral Lubricants in Norway, they state the following... "We have established our own warehouse in St.Petersburg, Florida and handle presently all inquirie
Electronics Forum | Sun Nov 01 16:28:05 EST 2009 | jeffreyj
Size is absolutely no problem for us, and neither is the need for 3ph. power. I've been shying away from the Universal GSMs because it appears their feeders can only index a certain distance which sounds like a real hassle. Also, I'm not too keen on
Electronics Forum | Wed Jul 19 21:45:21 EDT 2017 | kmno40711
We have been using InoAuto carts since 2015 and we have a number of them on our floor. We bought few of their passive carts on 2014 IPC show and that's how we know them. Although we already have efficient vertical revolving storage systems, we have
Electronics Forum | Thu May 20 22:38:01 EDT 2021 | kumarb
For closure to all readers of this thread...many thanks to Michal for this support. Trans-tec (USA) was great in replying to our countless emails on this topic. We sourced a replacement solenoid # A041E1-48W for our Emerald-X = YV88X. The part was a
Electronics Forum | Wed Jun 16 12:43:10 EDT 1999 | Brian
Cliff, I'm sending you by e-mail (don't think I can attach a graphics file here) the doc proof that the problem lies between Atlanta and Ft Lauderdale. This was an attempt to trace your routing. From Cyprus, it crossed the Atlantic by West Orange. U
Electronics Forum | Wed Jul 12 21:47:41 EDT 2000 | Dave F
Celiav: Mark is probably spot-on on his comments about a board fab problem. It is weird that you have similar problems from two suppliers though. Recommendations are: � Get rid of any bird brain contractor that installs processes that affect your
Electronics Forum | Tue Apr 03 22:03:18 EDT 2001 | davef
With friends like you, who needs enemies? I�d guess that the perceived benefits of flat pads for your 20 mil pitch and below components counter-balance the higher cost, gold being a solder pot contaminant, limited solder mask compatibility, potentia
Electronics Forum | Mon May 14 17:14:07 EDT 2001 | davef
First, consider checking the fine SMTnet Archives. Look for threads on "white tin", in addition to "immersion tin". We�ve had a cuppla good ones of late. Merix [http://www.merix.com] gives a good comparison of different solderability preservatives
