Electronics Forum | Mon Apr 26 20:14:48 EDT 2021 | goldendragon
Hello gen, Is there any recommendation of a liquid flux for SN100 solder bar on wave? Appreciates!
Electronics Forum | Thu Jul 22 17:26:16 EDT 2021 | proceng1
Spray or foam? Are you looking for IPA or Water based?
Electronics Forum | Mon Jan 14 09:15:44 EST 2019 | davef
Suppliers list the contents of their products in a MSDS. Libraries of these sheets are listed online. Look up the product you're using there. A safety data sheet, material safety data sheet, or product safety data sheet is a document that lists info
Electronics Forum | Wed Nov 12 08:10:47 EST 2003 | davef
As a minimum, you should observe the recommendations for disposal in your flux supplier's MSDS. For one VOC-Free Flux, the MSDS says something like: Waste Disposal Methods: Scrap material may be disposed of, by a licensed waste disposal company or
Electronics Forum | Mon Mar 25 21:45:22 EDT 2024 | buckeye
I got an inquiry from one of our electronics labs with regards to their soldering processes. They use eutectic (63% Sn, 37% Pb) solder. For liquid flux they are currently using Kester 186, which is an old-school, full rosin (RMA and ROL1) flux that c
Electronics Forum | Wed Jul 28 11:47:16 EDT 2004 | GCronin
I am looking for a consistent method of applying no clean liquid flux to solder pads. My main concern is if I use a standard air-over type dispenser mounted to an automated arm that the liquid flux will make a mess and not be consistent. I'm not to
Electronics Forum | Wed Nov 12 10:45:12 EST 2003 | johnthor
Absolutely, read the manufacturers MSDS. You do have it, don't you? We use Kester 971 and it reads Waste Disposal Methods: According to local regulations. Considered biodegradable. We did take the precaution of informing the local authorities and
Electronics Forum | Thu Jul 29 21:12:55 EDT 2004 | davef
Use a spray fluxer, like those used in wave soldering. Search the fine SMTnet Archives for supplier names. We understand that spray fluxing is significantly different than dispensing. What do you want/expect to accomplish by dispensing liquid flux
Electronics Forum | Thu Aug 05 12:02:48 EDT 2004 | Vince W
Go on the WEB and do a search of "Spray Fluxing" Several options should show up Good luck with your search
Electronics Forum | Thu Sep 06 10:55:37 EDT 2001 | davef
saturation occurs at ppm levels. Remember, IPA is extremely flammable and its bulk use makes the plant liable to all sorts of quite repressive safety rules/regulations and so on. Ignoring these rules exposes the owner to fines and possible plant cl
.gif)
winsouce.jpg)