Electronics Forum | Fri Jul 26 17:02:07 EDT 2002 | davef
Never heard of flux residues forming a lense. The first thing that comes mind when thinking about your 'fog test' is: Ionic Contamination While this seems pretty far afield from your interest in optical effects, I'll continue briefly. A reverse
Electronics Forum | Wed Apr 23 11:41:53 EDT 2003 | k_h
I've never heard of steaming a board either. You said that steaming cleans it better after the wash process. What is the steaming process cleaning that the washer isn't, flux residue, solder balls, or what? Also, try and identify the main difference
Electronics Forum | Fri Apr 23 07:30:35 EDT 2004 | pjc
Adding a Chemistry will reduce density of solution to get under the devices more effectively. You can clean your OA flux residues well enough with just hot water and hot DI water rinse. Top batch cleaners: http://www.speedlinetech.com/electrovert/aqu
Electronics Forum | Mon Aug 29 11:05:10 EDT 2005 | foresiteeric
davef: I am a colleague of Sara at Foresite and we came to the conclusion that the solder balls were entrapped based on the minimal amount of information from the original question and the fact that the x-ray showed the balls and it wasn't mentioned
Electronics Forum | Thu Mar 16 11:14:44 EST 2006 | Rob
Hi Jay, I'm guessing that you have either: a) heated length of 64 inches b) a zone temp of 230C and not a surface temp of this magnitude c) Burnt pizza's 8 mins at 220C for a perfect non frozen pizza, however I find that the thermocouples keep fal
Electronics Forum | Sat Jun 03 03:35:16 EDT 2006 | mika
Yes we do have a problem with this. We have by now investigate numerous lead/RoHS PCBA:s The RoHS boards are by far the most difficult one's to probe and test. Our people at the "test area" including Flying Probe and ICT they spend a lot of time to t
Electronics Forum | Tue May 16 15:30:07 EDT 2006 | George
Hi John, Are you talking about cleaning the pallets after running to store them? or during production? well in any case...I recently started to use this cleaning solution "Cybersolv" from Kyzen. It is water soluble and also can be used instead of IP
Electronics Forum | Tue Jun 20 10:26:07 EDT 2006 | samir
Chunks, I used to work in power electronics, and we had this design engineer who used to "blow moisture" on the high-impedance circuit and test for cleanliness. We were water washing in a OA-Water Soluble environment. He was convinced that there w
Electronics Forum | Fri Aug 11 16:19:39 EDT 2006 | T. Oaks
Hi, We have a issue with current leakage between pins on an SSOP 28 in a low frequency RF application and there is a suspicion that it is being caused by something in the flux residue. We have had the bad boards analyzed and a 'high' Chloride level w
Electronics Forum | Wed Dec 06 08:29:50 EST 2006 | David
Hi Pavel, We regularly use over printing on a multitude of problem parts including fine pitch QFP's. In an Automotive Environment the only thing you can change without a mountain of paperwork is the stencil. best way to work out how much you can get
