Electronics Forum | Fri Apr 13 15:42:18 EDT 2007 | flipit
This is sort of interesting. We had a clock problem with Alpha OM-338 lead free paste. The flux residue was causing a clock problem and the clock was only a few KHz. We went back ot OM-5100 lead paste and the problem never occurred again. Chris
Electronics Forum | Tue Jun 20 09:28:30 EDT 2006 | cuculi54986@yahoo.com
We evaluated four SAC305 pastes. Of the four, we found Alpha OM-338 to appear to have the least flux residue. We also found it to be the most dull, least shiny, most non-SnPb looking of the four.
Electronics Forum | Mon Apr 06 12:57:49 EDT 2009 | jdumont
We are using Alpha's OM-338-PT with great results. The PT means pin testable which was selected because its residues are a little softer and clean slightly better.
Electronics Forum | Wed Apr 27 09:15:30 EDT 2005 | russ
You will probably need to change paste. If I remember correctly the SMQ92J has a post reflow residue of 40%. This is one of the highest post reflow residue levels available. PIH uses a lot of paste which means a lot of flux residue. There are othe
Electronics Forum | Fri Mar 04 01:08:19 EST 2011 | kemasta
Thanks davef Bridging:- There is no heat sink on the BGA, the heat sink will be fix after relow. I do believe paste had something to do with it, but currently this defect didn't appear so oftenly, so we think that the main root cause is not from the
Electronics Forum | Fri Apr 13 12:24:07 EDT 2007 | teamcanada
We assemble for a customer that is having an inconsistent low level analog interference we believe with the no clean flux residue from Alphas OM5100 solder paste. We are considering testing Amtechs 4300 water washable no clean paste. We will test bot
Electronics Forum | Fri Apr 13 17:11:12 EDT 2007 | jmelson
Even though this is a "no clean" flux, are you (or the customer) cleaning the boards? If this is truly a low signal level device, there is no way you will get away without cleaning the flux residue. I do a lot of low-level hardware, and we have to
| 1 |
winsouce.jpg)
.gif)
