Electronics Forum | Mon Jun 19 09:47:23 EDT 2017 | georgetruitt
You have a lot to think about! What does the flux manufacturer recommend as far as specifics like water temp or pressure? Do they recommend high temp di-water a detergent or saponifier? Do you currently have a cleaning machine, batch cleaner or inl
Electronics Forum | Fri Nov 05 12:38:07 EST 1999 | Rich Cary
We are looking for some sealed (pressurized?) flux tanks with low qty. warning for use with our Tamura spray flux machines. I have heard that a company named "Binks" has made similar tanks for other companies, but when I search on the net for them I
Electronics Forum | Mon Feb 18 09:49:04 EST 2002 | Ashok Dhawan
Anyone using Kester 959 flux on Spray fluxer ? I noticed a black coating on filter element which is installed in supply line ( inside flux tank). The filter element is immersed into flux tank. It is turning blackish due to deposit of flux rosin ?? T
Electronics Forum | Tue Feb 19 15:36:37 EST 2002 | gtemple
We used no clean flux and experience the little filter in the flux tank going black. How long until it goes black? Could the pump be damaged, or you may have to start changing the filter regularily
Electronics Forum | Fri Jul 01 11:00:24 EDT 2016 | sachinverma
its spray fluxer we deassemble the nozzle clean and reassamble again. flux tank also clean with IPA. ya same problem in all product plz find the attachments about flux
Electronics Forum | Wed Jan 26 17:02:22 EST 2000 | Morris
One thing I've found that will create that white residue is when moisture comes in contact with that flux. 1. Verify that you are not introducing any moisture with the compressed air supply at the foam fluxer. 2. Replace the flux and clean the flu
Electronics Forum | Wed Jun 25 09:51:51 EDT 2014 | iam09
Hi Sirs, We are running Tin Lead process and we have boards that required clean and no clean process which have different flux application in our wave process. We are looking into opportunity to use common flux system for both clean and no clean an
Electronics Forum | Fri Nov 05 13:15:45 EST 1999 | John Thorup
Hi Rich It couldn't be simpler. www.binks.com Their main products are for paint and chemical spraying so it is likely that you will find a stock item that fulfills your need. good luck John Thorup
Electronics Forum | Thu Jul 09 21:17:18 EDT 1998 | Dave F
According to Howard, we clean the flux tank on our wave solder machines every week. We replace it because flux sops up moisture from the air and contaminating materials from boards that are being fluxed prior to soldering. How would a prudent perso
Electronics Forum | Mon Oct 02 13:46:53 EDT 2023 | SMTA-72837649
If it's the same as the 32D, 2 things need to happen. Air pressure at the nozzle for atomization, and the solenoid at the bottom of the flux tank needs to open to provide a gravity stream of flux. You should be able to take both hoses off and check f
