Electronics Forum | Mon Jun 04 10:40:37 EDT 2012 | davef
I'm not aware of any such stipulation about witness [probe] marks for assembled boards, per se. Certainly, witness marks should not affect the intended performance of the assembly, you know, like damaging the solder connection or smudging solder mate
Electronics Forum | Mon Jun 04 23:52:57 EDT 2012 | rway
Actually, if you experience lack of witness marks, you probably have a problem. Witness marks are OK and will not affect your assembly. I assume this is an SMT assembly we are talking about, in which case, this is what your test pads are for. You
Electronics Forum | Tue Jun 05 02:22:07 EDT 2012 | vileo72
Dear Dave/pr/Reese, Thank you so much for the information and this will certainly help me to align on the query .Would like to know further :During Flying probe testing the vias are also observed that they have pin mark on the annular ring due to the
Electronics Forum | Wed Jan 04 12:48:34 EST 2006 | pjc
In-Circuit Test is the best method for ensuring solder joint connections. It is a much more reliable than AOI. An ICT machine can ensure solder connections are made for array package devices such as BGA, PGA, etc... AOI is best for component I.D.- is
Electronics Forum | Fri Aug 08 11:37:09 EDT 2008 | pjc
Yes, sure. In fact in some applications ICT is coming back. Mainly due to the fact that more and more SMT discrete components have no markings, so AOI cannot tell you if you have the correct value on the PCB. Fixed pin or flying probe ICT is a valuab
| 1 |
