Electronics Forum | Thu Sep 07 12:29:55 EDT 2006 | Rob
Have some perspective - not all financial companies are asset strippers. Franciso Partners are backed by Sequuoia Capital who backed little known minnows like Apple, Yahoo, 3Com, Cisco & Google at the early stage. Who knows what the future hold for
Electronics Forum | Fri Sep 01 04:16:31 EDT 2006 | sant
Hi In my previous organistaion I had worked with LPKF m/c model C60 and have seen the T-tech m/c working also. I'll give the weightage to LPKF because of its performance. For your application I feel 100Krpm spindle will be more suitable. Support/serv
Electronics Forum | Fri Sep 01 10:12:06 EDT 2006 | dmascare
I forgot to mention, for the 60K rpm spindle with 13" X 19" work area I am in about the $21K to $24K price range. The 6K price differential is due to t-tech offering a 15% percent educational discount. LPKF would only give me at most a 3% GSA disco
Electronics Forum | Mon Sep 11 10:35:32 EDT 2006 | Gus Widmayer
Hi Dexter, Your problem may not be with the feeder itself but with the quality of the tape you are receiving. OX3 Corporation performs a peel test on every single line item that is processed through its facility. You may want to check with your cu
Electronics Forum | Thu Sep 14 08:09:39 EDT 2006 | dmfausti
Thanks for the reply. I will try to clean this feeders. They all seem to be worn out and needs cleaning and adjustments. Peel tester could be another way for us of making sure our system goes more efficiently. This peeling problem usually occurs on
Electronics Forum | Fri Sep 15 01:25:06 EDT 2006 | AR
Hope that cleaning helps. Mind you, the mechanical feeders are only rated for 4 million operations and some components need replacing after 2 million operations. You need to think carefully whether it is worth your while to try to resuscitate your ol
Electronics Forum | Wed Sep 13 12:30:20 EDT 2006 | ianlg
Hi If you are looking for a good solid reliable printer you might like to compare the Dek 248 and 100MV's with the R29-V from Reprint in the UK. It has great software and vision system and is built on a new platform whereas the Dek 248 and 100MV/Mi
Electronics Forum | Tue Sep 05 09:54:33 EDT 2006 | slthomas
We had the same problem with our E5. I had the shop make us a template for each two-sided board out of some 1/16" acrylic. The template had cutouts in it to drop the pins through where the bottom side parts weren't. Seemed to work fairly well, no com
Electronics Forum | Wed Sep 06 03:53:49 EDT 2006 | dougs
we do a similar thing but make the template from paper, we just print out an image from the gerbers (to size) showing both sides in different colours, we set this down on the table (had to work out first where the correct position was) then we place
Electronics Forum | Wed Sep 20 15:56:44 EDT 2006 | Rapid
There is a quick change dedicated tooling solution. It involves a "h-tower" and a machined vacuum (or non-vacuum) plate. There are two 8mm threaded holes on the table that are there for support tooling interface. The tower or tooling bolts to thos