Electronics Forum | Thu Feb 15 14:26:23 EST 2024 | bmalhi
Please contact Heller via email at ServiceNJ@hellerindustries.com for software assistance and information about the procedure.
Electronics Forum | Thu Feb 15 19:56:25 EST 2024 | duchoang
Hello, We have Versaprint ERSA Printer. The machine has been working so well since over 10 years. Now, the vaccum cleaning option is not workinh anymore. The machine stops right before the vaccum cleaning start. Any idea to help fixing that problem?
Electronics Forum | Fri Feb 16 13:29:53 EST 2024 | mistrthou
We don't have that machine, but our other DEK's all share a solenoid. Air for both sides should be on or off all together. I'd check for an air supply to the clamps that switches when commanded to clamp or unload.
Electronics Forum | Fri Feb 16 13:59:51 EST 2024 | erikfriesen
I unsure on this, that it would actually work on my CP45 for example. It is windows XP embedded with 128mb ram. The second question really, is, would this boot a new IDE drive on XP? I'd be curious if anyone has had to do this and it worked.
Electronics Forum | Fri Feb 16 15:12:27 EST 2024 | capse
ASMPT SEMI USA, Inc. 7850 S Hardy Drive, Suite 110, Tempe, AZ 85284-112 U.S.A. Phone: +1 602 437 4760
Electronics Forum | Fri Feb 16 17:04:17 EST 2024 | jborrelli76
Thanks, will do. The point that's odd is one side functions. I think there may be a cable that causes each bank to clamp that may be broken. Time to get my hands dirty...
Electronics Forum | Fri Feb 16 21:51:15 EST 2024 | jborrelli76
I was correct...the cable that operates the stencil clamps on the right bank is severed...do you know where I can get a replacement cable part number 163368? Thanks.
Electronics Forum | Mon Feb 19 19:31:24 EST 2024 | erikfriesen
Does anyone know where I can find the DB50 pinout to build an Upline SMEMA? Any chance it would be the same as the Downline? Exact machine is Horizon 02i.
Electronics Forum | Thu Feb 22 13:50:18 EST 2024 | erikfriesen
Thank you, there are a few more things in that service manual than I have. Really what I was looking for, and didn't find, is there any type of comp table for the ballscrew on these machines?
Electronics Forum | Fri Feb 23 14:51:48 EST 2024 | carl_p
Just another thought - how long is the printer idle for between boards? is it long enough to have the chemicals start to separate within the paste?