79114 forums/index.cfm results

Electronics Forum: forums/index.cfm (Page 6880 of 7912)

MVP 1820 AOI

Electronics Forum | Thu Sep 07 08:18:19 EDT 2006 | Rob

Hi Pavel, Great machines - very good for high volume - we did a lot of OEM overflow work and for fault finding & speed it kicked the other more expensive machines into touch. However... Programming is a lot slower initially than some of the othe

FMI Protocol

Electronics Forum | Wed Aug 30 03:58:26 EDT 2006 | Ola

Yes you do need a different upline interface card. This information should be in Your Technical Reference Manual, Electronics enclosure chapter 6? Y2 Enclosure, card position X8 Downline and X9 upline: Part No Description. 112045 Base Card

AOI

Electronics Forum | Thu Sep 07 07:38:14 EDT 2006 | travis1977

I have experience programming and using the yestech system in a high volume high mix environment. The system seemed to work well until I used a more sophisticated system. When I changed jobs and had another opportunity to spec. in paste and post-r

AOI

Electronics Forum | Thu Sep 07 09:32:14 EDT 2006 | tony_d

Hello Saaitk, I was recently tasked with selecting an AOI system for our company. We are a low to medium manufacturer as well. I looked at several different vendors and narrowed the field to Mirtec and Yestech. I found that the programming was v

Infromation request from advantis users

Electronics Forum | Mon Aug 28 13:14:49 EDT 2006 | SWAG

We just bought an Advantis w/flexjet head. Great machine. No problems with anything and Universal support is excellent as always. Prec-Pro dual lane feeders are the way to go. Also, I recommend buying the NPI module. This software allows you to

MPM UP2000 Hi-e

Electronics Forum | Tue Aug 29 10:36:09 EDT 2006 | Chunks

With the UP2000 that has vacuum board hold down, the Grid Loc hoses defeat the vacuum in order for them to exit the work table. Big boards require more girds, thus more hoses. Set-up between large and small boards takes time to remove or add the gr

MPM UP2000 Hi-e

Electronics Forum | Tue Aug 29 11:34:42 EDT 2006 | pr

WOW, for having never spent more than a drive by with the units and NEVER having set it up or used it, you are a wealth of info. who say's you can't learn anything from the fine smtnet archives? You definately have bean bags on the chin (mind) cause

MPM UP2000 Hi-e

Electronics Forum | Wed Aug 30 23:58:53 EDT 2006 | jasmin

We are looking into purchasing a used UP-2000 > Hi-e. We are high mix /high change-over. The > machines I am looking at are equipped with the > grid-lok system. > > Can anyone give me pros's/ > con's ?? > > Thanks in advance. > > Sr. Hi Sr T

MPM UP2000 Hi-e

Electronics Forum | Thu Aug 31 18:58:37 EDT 2006 | chrisgriffin

Fastek, You are correct. I know of machines you can get for 25k that are in working condition. But if I was going to buy one used, I would want it refurbished and calibrated. I would also be interested in support and warranty. I don't know of an

MPM UP2000 Hi-e

Electronics Forum | Thu Aug 31 19:40:22 EDT 2006 | cardinal

A couple things on the Grid-Lok system. They now offer a top-side edge clamping system. The edge clamping system works very well for warped, twisted boards etc.. Using this system in the auto mode also allows the pins to contour to the geography of


forums/index.cfm searches for Companies, Equipment, Machines, Suppliers & Information

PCB Handling with CE

World's Best Reflow Oven Customizable for Unique Applications
SMT spare parts - Qinyi Electronics

Nozzles, Feeders, Spare Parts - Siemens, Fuji, Juki, Yamaha, etc...
Best SMT Reflow Oven

High Throughput Reflow Oven
PCB Handling Machine with CE

Best Reflow Oven