Electronics Forum | Tue May 17 10:11:54 EDT 2005 | russ
I would use a foam fluxer since spraying rosin will make the stickiest nastiest mess you can imagine. 18 layer board huh? You will want convection preheat, both top and bottom preheaters, preheat tunnel of at least 4-5', a chip wave, laminar flow w
Electronics Forum | Fri Sep 30 09:03:55 EDT 2005 | davef
Pick and place: * Fuji: The largest pcb size is 20" by 18" for pick and place; 18"x14" for chip shooters. * MYDATA has machines that can be configured to 34" X 44" X 0.500" * Fuji has the NP XL series that will allow 27 by 23 inch boards using a con
Electronics Forum | Mon Apr 09 10:16:14 EDT 2007 | davef
Pick and place: * Fuji: The largest pcb size is 20" by 18" for pick and place; 18"x14" for chip shooters. Fuji NP XL series allows 27 by 23 inch boards using a conveyor. * MYDATA has machines that can be configured to 34" X 44" X 0.500" * HSP 4796A a
Electronics Forum | Sat Jun 12 00:34:00 EDT 2004 | kanwal324
Hi ! The main problem being faced currently is formation of solder balls - to be precise, these are micro solder beads generally found attached with bodies of SOTs, Chip Caps, Chip Resistors, between pins of SOICs (50 mil) - lying on PCB surface,
Electronics Forum | Tue Mar 11 18:01:26 EST 2003 | russ
Tim, I cannot remember what model our T.D. wave was it was a small unit about 8 ft. long "tabletop" is what I call them. In keeping up with this thread I noticed a lot of T.D. support. So, I decided to backtrack and review history with my previous pe
Electronics Forum | Tue Jun 11 14:45:59 EDT 2002 | stefwitt
I can not find a F4G in Fuji�s equipment list. Siemens has a F4 ( flexible fine pitch machine ) and also a GII ( glue dispensing machine ), which both would make sense to add to your equipment list. Machines are �connected� together with their conve
Electronics Forum | Mon Dec 17 09:15:57 EST 2007 | kpm135
I have personally worked with MYData, Quad, and Panasonic in the past. We are a High Mix, Low Volume CM. The plan that is in the works is to use the CP6 to place all chip components and then use our MYData TP9 or MY12 to place the rest of the compone
Electronics Forum | Tue May 23 20:44:13 EDT 2000 | Dave F
Sal: You and Wolfgang are spot on, but let's see if we can blow this out a bit. Before proceding to rattle on ... � PC Card. A credit card-size computer peripheral that add memory, mass storage, and I/O capabilities to computers in a rugged, compa
Electronics Forum | Thu Oct 04 00:05:25 EDT 2018 | gaintstar
Flason SMT chip mounter Reflow Ovens: http://www.flason-smt.com/product/PCB-assembly-line-equipment-SMT-spare-parts-Dek-Motor-188962.html http://www.flason-smt.com/product/PCB-Conveyor-for-LED-Production-Line-SMT-Assembly-Line.html http://www.flason-
Electronics Forum | Thu Oct 04 00:00:58 EDT 2018 | gaintstar
Flason SMT Reflow Ovens: http://www.flason-smt.com/product/China-Reflow-oven.html http://www.flason-smt.com/product/China-Samsung-EXCEN-PRO-High-Speed-SMT-Modular-Chip-Mounter-agent.html http://www.flason-smt.com/product/China-Samsung-SM321-High-Spe
| 1 |
winsouce.jpg)
.gif)
