Electronics Forum | Tue Feb 16 08:47:38 EST 2010 | jdengler
We powered up our CP-IV today and got an error. About 7 seconds after power on page 000 comes up with nothing in any of the areas except for second status area which contains "LD INIT" in yellow. After about 16 seconds the second display area gets
Electronics Forum | Tue Feb 11 15:31:10 EST 2020 | sumote
We have not used out tray handler in several years, and when I had a need arise the thing now throws a Servo Error "MTU1 ALARM [11081010]. There are 4 servo packs in the cabinet. When I try to initialize/zero out the machine the 2nd and 4th servo pa
Electronics Forum | Tue Jul 10 08:59:07 EDT 2012 | zrunkle_api
First post here. the company I work for has to CP4 and the newer of the two is given us a Q4 Rotation Error. Anyone have any idea what this is and what is causing it?
Electronics Forum | Wed Jul 11 12:10:06 EDT 2012 | cyber_wolf
Q is theta related.
Electronics Forum | Wed Jul 11 12:49:49 EDT 2012 | cyber_wolf
There is probably a component stuck in the theta gears or it needs PM'ed
Electronics Forum | Wed Jul 11 12:34:10 EDT 2012 | zrunkle_api
Thanks for the help. I will lock into that. The weird thing is if we let the machine sit for like 30 mins it will run again for like 30 mins to an hour and then give the Q4 Rotation error.
Electronics Forum | Wed Jul 11 12:35:01 EDT 2012 | zrunkle_api
Thanks for the help. I will lock into that. The weird thing is if we let the machine sit for like 30 mins it will run again for like 30 mins to an hour and then give the Q4 Rotation error.
Electronics Forum | Fri Apr 16 17:44:40 EDT 2010 | rodrigo
We're still trying to fix a C-axis overflow error in our CP-65. I was swapping servo boards and one of them started to blinks a 2 on the LED single digit display and the machine didn't boot up. I replaced the servo board with a spare we bought on eba
Electronics Forum | Fri Jul 13 07:00:31 EDT 2018 | negev
I am not sure if anyone can find this information usful...but I will post it anway, our old CP-642 couldnt start up with "LOADER INIT ERROR"changing the battery in the CP1 I/O card solved the problem.
Electronics Forum | Sat Sep 08 23:36:14 EDT 2012 | mtech88
Can anyone help me out this Fuji CP4 problem? I just move my machine to a new place, The feeding sensor error keep on poping up. but the mahine work on manual mode. When we switch to auto mode, it just to pick up the part and the machine stop on t
