Electronics Forum | Wed Nov 07 10:56:45 EST 2007 | fastek
I would suggest skipping this step altogether. No one will ever know.
Electronics Forum | Wed Nov 07 01:50:44 EST 2007 | jepoy
The method that you are using is the same method usually used by other fuji user. Their is no other way of doing this. Mastering this, make this job so easy in the long run.
Electronics Forum | Wed Nov 07 11:09:43 EST 2007 | cyber_wolf
Ya probably most used equipment guys do skip that step on the machines they sell as "production ready" As for us, our machines need to actually build boards without going down on the errors that dirty clutches create....you silly man.
Electronics Forum | Tue Nov 06 07:37:02 EST 2007 | cyber_wolf
Does anyone out there have a method of cleaning CP6 shaft clutches that is "easier" ? I am not a fan of just pulling the shaft down and wiping it out. I like to take them apart and clean/lube them. It is a pain to get the crowns back on without rip
Electronics Forum | Thu Jun 11 06:57:22 EDT 2015 | cyber_wolf
Linux, The amount of error that you are describing is about the thickness of a human hair. Unless you are placing 0201's I can't understand why .12 is an issue. There are many factors that can effect placement accuracy on a CP6 For instance: 1. M
Electronics Forum | Thu Mar 30 12:13:10 EST 2006 | Tech
Obviously you are not as experienced as you think so I will help you out a bit.You are correct on the size of the wrench. I was trying to recall from memory but the wrench size is 8mm. The odd size I recalled came from the other side of the wrench th
Electronics Forum | Fri Mar 31 10:22:59 EST 2006 | Tech
It could be related but it is kinda hard to tell from just this info. A lot of times if a clutch gets misaligned so bad that the machine has no idea where it is the machine will stop and turn the clutch several times trying to find its home point. It
Electronics Forum | Wed Mar 29 16:25:55 EST 2006 | Tech
Find you a good degreaser to clean the clutches with. Fuji used to ship Threebond with the machines but quit due to negligence on the part of the users if I had to guess. I believe the number was Threebond 2706. Now make sure you take a shop rag or s
Electronics Forum | Sat Apr 01 07:49:12 EST 2006 | cyber_wolf
DAX ! You don't need to remove the entire shaft assembly to clean the clutches. You can just drop the top portion of the spline out to get to them. It seems as if you have already taken off several shafts. I would HIGHLY reccomend that you do not
Electronics Forum | Tue Nov 19 12:34:33 EST 2013 | jimmyboz
I am not trying to be critical but, you didn't even say Fuji CP-6 problem. There are CP-6, CP-642, and CP-643 machines, are asking 2 model as 642? Anyway, slow the cam speed down in the proper to 40 or 50%. If the problem goes away check the mainte
.gif)
winsouce.jpg)