Electronics Forum | Wed Mar 29 23:48:39 EST 2006 | ____
Look on the serial number on the body of the feeder. If it starts with "W" it is a CP6 feeder. If it starts with "K" it is for the CP7. It really doesn't matter for which machine, it all depends on the bucket style feeder. If the feeder is a bucket s
Electronics Forum | Wed Jan 02 12:25:47 EST 2013 | wesley
I have a Fuji MCS30. and I have a problem. when I turn it on, the display of the monitor is "ALL FAILED BOOT DEVICE". if any indication of their colleagues to help me. I need manual MCS30. thank you
Electronics Forum | Fri Aug 31 00:08:10 EDT 2007 | ventron
Hi all, Please help me to solve this problem: When I turn on MCS30, it couldn't boot. It appears this error: " BOOT DEVICE ALL FAIL !". Please help me ASAP. Thanks,
Electronics Forum | Wed Apr 12 06:40:11 EDT 2006 | aj
All, I continuosly have reliability issues when placing a SOT363 device. I have Fuji CP6 and CP4 placement machines. The part data has been analysed down to the finest detail but it is still hard to maintain any consistency. Anyone else have simi
Electronics Forum | Tue Feb 01 16:56:46 EST 2022 | rstellema
Hello all, I have a couple of old FUJI CP-6 SMT placement machines that are operating with very old PCMCIA Flash Memory cards. I would like to insure that I have back-ups should the memory cards fail. I assume that I would need a support USB reader/w
Electronics Forum | Wed Aug 23 14:44:07 EDT 2006 | johnw
They are various way to debug this problem, try booting into mecha check, The cpu wouldnt cause a vp error all that is related to the VP are 3 cards the gognex the vp card and the memry backup card. If this fails print out the trace machine code and
Electronics Forum | Sat Aug 19 21:06:09 EDT 2006 | mika
Hi all, At our Fuji CP-6 machines we place a lot of 0402:s, 0603:s and 0805:s chip capacitors. Our problem is that the height of the components can sometime be very extreme from different vendors. I am sure you all have experience of this phenomenon
Electronics Forum | Thu Apr 04 12:52:48 EDT 2019 | rodrigo
Hi, Our MCS30 had a bad backup battery in one of the boards. After changing the battery I got the all boot devices failed error. I managed to get a hold of some boot floppy disks and I can use disk1 to boot the MCS30 to a "$" prompt. I also have a di
Electronics Forum | Tue Apr 04 23:01:37 EDT 2000 | Dean
Does Fuji America have a trade in program? I know they used to on vision cards and such. It may be worth your while to get a trade in allowance rather than none at all. The alternative, as you mentioned, is to repair it yourself. This however, w
Electronics Forum | Mon Aug 21 04:20:49 EDT 2006 | Rob
Hi Mika, I used to work for the largest chip cap manufacturer in the world, and by far the largest problem we would see was cracking due to incorrect z height adjustment on Chipshooters. It can also cause solderballs and bad joints by displacing th
winsouce.jpg)