Electronics Forum | Wed Dec 17 07:48:20 EST 2008 | muarty
Just trialled some NXT nozzles from SMT Xtra - very impressed by the quality of them, I would guess that their CP nozzles would be of similar standard. Had mixed results whilst using Metro nozzles for CP6 equipment, found lengths varying etc. You co
Electronics Forum | Thu Jun 10 16:51:01 EDT 2010 | daxman
Hi Manuel, We've been placing QFN's with our CP6's for a long time now. We use vision type 10 just like you describe. I wouldn't bother with front lighting & trying to pick up the leads. Inspecting the leads doesn't provide better accuracy. I would
Electronics Forum | Wed Sep 11 01:17:59 EDT 2002 | Brian Sloth Bentzen
Hi Steve. My Fuji CP6 is model 643 and are 3 years old, maintained and upgraded with the newest software along the way. And, actually it was Fuji Japan that gave in, not Fuji America. Fuji Japan tested our components and found the same problem and
Electronics Forum | Wed Jul 26 11:14:50 EDT 2006 | FredC
Are these covers repacements for the tape guides? If so in retipping many thousands of cp6 nozzles we see that the window in the tape guide is often miscentered and the needle tip rubs on the same place every time it picks. I expect the miscentered g
Electronics Forum | Tue May 20 14:25:06 EDT 2008 | cyber_wolf
We use SMT Research nozzles. They are excellent.As good as if not better than OEM...in my opinion. We have been looking at some other possible suppliers such as Metro. We have CP4's and CP6's Any insight much appreciated.
Electronics Forum | Tue Jan 30 10:20:20 EST 2007 | mee
you need to clean the holders
Electronics Forum | Thu Oct 04 00:01:59 EDT 2018 | gaintstar
Flason SMT FUJI Pick and Place Machine: http://www.flason-smt.com/product/FUJI-Chip-Mounter-SMT-spare-parts-A10395-Fiber-Amplifier.html http://www.flason-smt.com/product/FUJI-Chip-Mounter-SMT-spare-parts-Amplifier-A1038t.html http://www.flason-smt.co
Electronics Forum | Thu Aug 05 20:33:48 EDT 2004 | Dhanish
The machine type is Fuji CP6.We have major issues with Network Resistor placement.The equipment guys often feedback there is a problem with nozzle and feeders.What will happened to the part if the Thickness data in the Part Data does not match the Pa
Electronics Forum | Sat Jan 21 20:20:38 EST 2006 | Curt Couch
Sir, reverse wound springs do help this situation. I would also recommend using acetone in the wind mills, its made of 440C SS and has R/c hardness of 58-60 you need to use something that will cut the gauling deposits left from the aluminum in the no
Electronics Forum | Mon Aug 21 10:47:48 EDT 2006 | FredC
Hello Mika, I just checked a windmill and a test nozzle we have on the bench. The useful travel of the nozzle before the risk of the crosspin getting stuck in the loading gate is 1.5mm, if it gets stuck it is the nozzle is 1.7 up. If the cross pin is