Electronics Forum | Tue Sep 17 07:42:27 EDT 2002 | cyber_wolf
Hi, We have a serious problem bending our 24mm tape covers. In particular we are feeding a 24mm 16 pitch tape on a 24mm P8 feeder.The component is a plcc28,the tape cover is a AMCD3107 5.0 When the tape covers come in from Fuji the fingers that cove
Electronics Forum | Tue Aug 24 17:47:50 EDT 2010 | smtmax
I'm looking for CP6 fuji feeder. 16mm x 12mm (KO=8.3mm) 24mm x 20mm (KO=10.9mm) Please help! Thanks!
Electronics Forum | Wed Jul 26 11:14:50 EDT 2006 | FredC
Are these covers repacements for the tape guides? If so in retipping many thousands of cp6 nozzles we see that the window in the tape guide is often miscentered and the needle tip rubs on the same place every time it picks. I expect the miscentered g
Electronics Forum | Wed Jul 26 14:40:28 EDT 2006 | FredC
I just checked a hand full of scrap nozzles and the scuffing is usually on the right or left of the needle. If you have the cross pin facing you and looking down on the nozzle most of the scuffing or wear was on the left side, sometimes on both sides
Electronics Forum | Wed Jun 12 18:33:57 EDT 2019 | dman97
No Fuji support? CP6 series or Aimex 3?
Electronics Forum | Mon Oct 22 10:54:48 EDT 2007 | mulder0990
What type of feeder storage carts do you use for your feeders? I have many of the Fuji CP-6 racks, but I have found the few Mossman Tebbs racks mor useful and safer for the feeders. I am constantly fixing damaged tape leaf covers from operators not
Electronics Forum | Mon Oct 22 11:41:16 EDT 2007 | cyber_wolf
The newer style feeder carts from Fuji are the best I've seen. It is impossible to screw the tape covers up with the newer style racks.
Electronics Forum | Tue Mar 05 06:42:22 EST 2019 | cyber_wolf
This is for a specific type of CP43 feeder. It does not work on CP6 feeders. You also have to have the base it bolts onto, the standard, and the calibration tapes.
Electronics Forum | Wed Sep 05 12:24:58 EDT 2007 | mulder0990
I have found a torque checker for the Fuji CP6 feeders. It is offered through fuji for a resonable price. The two other factors I have found for problems are the Guide cover not being clean or oil or dirt in the Reel itself. I have not tested the
Electronics Forum | Mon Oct 29 14:54:16 EDT 2007 | cyber_wolf
7k is too much man. We paid 5K for our Fuji jig. It came with all of the master tapes and master guages.
