Electronics Forum | Fri Oct 01 21:21:05 EDT 2004 | Darren
Dave Try fuji's web site they have the ops and maintenance manuals in the support area. While you are there they have a bunch of useful stuff for software and machine manuals
Electronics Forum | Tue Oct 05 21:09:39 EDT 2004 | cabjerk
THe Fuji Japan site has a more complete set of all manuals. Only one problem you have to get your password from them, and they send it to you by snail mail. Carl B.
Electronics Forum | Tue Nov 19 12:34:33 EST 2013 | jimmyboz
I am not trying to be critical but, you didn't even say Fuji CP-6 problem. There are CP-6, CP-642, and CP-643 machines, are asking 2 model as 642? Anyway, slow the cam speed down in the proper to 40 or 50%. If the problem goes away check the mainte
Electronics Forum | Fri Dec 08 17:31:17 EST 2023 | madisreivik
Changed camera, flicker is gone. But cannot calibrate nozzle centers with the narrow camera, error all time I checked buffer image, brightness and contrast is SAME as with wide camera. Center of camera is roughly aligned using nozzle, its better
Electronics Forum | Fri Dec 15 20:51:01 EST 2023 | cyber_wolf
Calibrating the cameras on these machines is not something you can do "correctly" without the jigs from Fuji and following an exact method. It's been years since I watched a Fuji FSE do this, but I can assure you that unless it is done EXAC
Electronics Forum | Wed Apr 03 13:32:30 EST 2002 | Bob
Hi, Just to ease your mind a little. I have 15 years experiance on Fuji kit, and was the engineer in charge of over 30 CP6's. They are very robust and the electrical / electronic side is pretty bomb proof. The main thing to look out for is wear in
Electronics Forum | Fri Dec 08 19:02:12 EST 2023 | madisreivik
Found the main problem During messing around (hopelessly :) we had found the calibration menu and pressed "check". Machine thought that there was a calibration nozzle (maybe 10x10mm square) but in reality, there was d=1.0mm nozzle. Machine decided
Electronics Forum | Fri Jan 11 00:08:20 EST 2013 | mdang
Hi All, Does anyone has a copy of CP65 electrical schematic manual? Thanks, -Michael
Electronics Forum | Wed Sep 08 23:36:12 EDT 1999 | Jason Tomlinson
| | | Dear all, | | | | | | I don't know if I'm asking at the right place here, since you all seem to be more focused on process problems then programming problems (or perhaps programming isn't a problem for you). | | | | | | I'm using FUJI CP642's
Electronics Forum | Fri Sep 15 14:29:10 EDT 2006 | bvdb
Thanks "j". There is absolutely no support for Fuji in New Zealand or for the older IP-1 and MCS/2 programming computer. We got the machine working by studying the FIP-1 Operation Manual and the MCS/2 Programming manual and a lot of trial and error
