Electronics Forum | Sat May 21 07:23:38 EDT 2005 | ajaydoshi
We do face problem in CP643E, - Vision system alarm & later machine require to turn off. This problem ocurrs once in a week ( average ) Checked up Fuji along with trace data but could not able to get any solotion. Any recommondation. ajay doshi
Electronics Forum | Thu May 26 06:04:49 EDT 2005 | johnw
Hi Guys I have had this fault and it was traced to the ccd power module on the camera Zsolt I think I know you drop me a mail Tatabanya
Electronics Forum | Mon Apr 26 08:15:37 EDT 2004 | pjc
MPM uses a one-print-Mylar system, as do other printer mfrs. In this system there is a Mylar sheet attached to a frame that is secured over the printer table with the board on it. You print onto the Mylar. The table X-Y-theta manual adjustments are u
Electronics Forum | Tue Nov 17 21:03:46 EST 2015 | wesleyintelli
Our Speedline MPM UP100 has stopped displaying anything on its monitor where the fiducial positions are usually taught with the camera images. The vga cable is working. Are there any commonly occurring issues with the vga vision board? The rest of th
Electronics Forum | Mon Apr 26 15:04:14 EDT 2004 | pjc
You are correct in understanding that the vision system comes into play for subsequent boards- to align them. Yes- if you missalign the first board and set the cameras to that board, all subsequet boards will not be aligned. Mylar is a thin polyester
Electronics Forum | Mon May 14 03:21:20 EDT 2001 | Eyal Duzy
Phil, In the considerations you make for choosing an AOI tool, you should check what a vendor delivers today and what will it be able to deliver in the future. As the role of AOI in the SMT production line evolves from "detection" to "prevention"
Electronics Forum | Thu Apr 29 16:58:00 EDT 2004 | pjc
You should be able to get a one-print Mylar frame for the SMTech 90 machine from SigmaPrint, http://www.sigmaprint.co.uk Yes, with vision you store images of two features such as solder lands or fidicial marks from opposite corners of the board. With
Electronics Forum | Thu Feb 15 15:23:12 EST 2007 | bvdb
The IP-1 vision error is" "Processing Error" er 401F 4003 which the FIP-I Operating Manual says the cause is "The actual number of leads on the part exceeds the number of leads in the Part Data". I have checked and re-checked the part data, lead
Electronics Forum | Tue Nov 22 10:46:46 EST 2005 | A Total Green Planet Solution
Try using a contrast filter. This seems to help. Also on the camera it self there is a white level control. Adjusting this may help. The bad thing is it may affect all your other profiles. Some times an easy fix is to have a screen print mark close t
Electronics Forum | Tue May 22 12:47:52 EDT 2007 | cyber_wolf
Is there anyone out there using this ? It looks like they only sell it for the 643 machines. Can it be adapted for 642 machines as well ? We have 2 major problems: 1. Operator makes width change adjust without removing supports from previous job. Ta
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
