Electronics Forum | Mon Nov 29 13:01:35 EST 2004 | bobsavenger
I have a DEK 265LT screen printer and a Fuji bare board loader. I cannot get the two machines to talk through the SMEMA cable. I have the personality card for the DEK and I have the correct cable for a FUJI machine. Is there something that I nee
Electronics Forum | Wed Aug 30 03:58:26 EDT 2006 | Ola
Yes you do need a different upline interface card. This information should be in Your Technical Reference Manual, Electronics enclosure chapter 6? Y2 Enclosure, card position X8 Downline and X9 upline: Part No Description. 112045 Base Card
Electronics Forum | Mon Aug 28 08:43:27 EDT 2006 | aj
Hi all, I have just got a second hand bare board loader ( PAF ) It seems to be in good working order . The loader is upline to a Dek 265gsx. I have tried all the FMI protocols but none seem to work. I am now thinking that I moght need a different pe
Electronics Forum | Mon Sep 02 23:56:08 EDT 2013 | dekhead
Looks like too many signals there for a DEK SMEMA board to handle; trying to translate / ascertain what signals those are, to offer possibilities to communicate with DEK; However would pretty much guarantee a need for hardware change (personality car
Electronics Forum | Mon Dec 06 21:41:13 EST 2004 | pdeuel
I have the same problem but an MPM downstream of the Fuji. Im looking for schematics for this Fuji. Before we had another machine hooked to this Fuji and the output switch needed to be set to latch. Otherwise only a pulse was seen and it was not long
Electronics Forum | Mon Jul 20 11:46:18 EDT 2009 | msherwood
I’m having trouble with the transfer of one board from the UIC conveyor to a DEk screen printer. They are set up for SMEMA to SMEMA but the DEK keeps asking for a aboard when it already has one. Then it will ask for one every 5-8 seconds. DO I have a
Electronics Forum | Sat Mar 14 21:22:48 EDT 2009 | adretech2
We are able to repair Cognex vision cards VM16, VM16A for DEK, MPM, Camalot and other machines. So far- 100% success. We are from Canada. We DO NOT ship your board to other repair shop and take commissions, like many others do. See http://www.art-ind
Electronics Forum | Thu Aug 29 15:09:23 EDT 2013 | bvdb
Hi, Yes, there is a board marked "Memory Board" but it does not actually contain any memory. The memory card is attached to the CPU card. The board marked "Memory" is a board that allows you to plug in a Compact Flash (CF) memory card which we do
Electronics Forum | Tue May 28 12:56:22 EDT 2019 | dekhead
It is a communications failure between the CPU and the Cognex card. Does comms initiate between the 2 cards (flashing green on both)? or does it immediately come up red LED on Cognex? Have you reseated the CPU board as well as the Cognex? Is this a s
Electronics Forum | Wed Aug 31 08:12:37 EDT 2016 | ttheis
Search for the bios or motherboard on ebay. Type in the part numbers you find on the boards and see if anything comes up. Often these are standard pc boards. I've repaired my old MPM by finding the cards on ebay cheap.