Electronics Forum | Thu Oct 21 06:26:50 EDT 2004 | dennispoquiz
Right. Fiducial comes with the CAD data or the gerber files. If it doesnt, and you need to create fiducial coordinates, you may use a digitizer or a caliper and make use of the reference pin as the origin. Now if the fiducial camera focus is way out,
Electronics Forum | Thu May 13 10:43:34 EDT 2004 | rob_thomas
hi, i have a question relating to fiducial, is > the fiducial normally comes with the pick and > place data from the custommer or we have to > define it by ourself? how to set its coordinate > so that the cp6 and ip3 (using Fujicam software) > w
Electronics Forum | Thu May 13 09:32:52 EDT 2004 | Ordie.
Nice attitude Newbie, real mature of You. This guy had a problem, and thank God someone helped him. If all of us knew everything, as You do, there would be no use for this web site. Please pull your head out once and a while.
Electronics Forum | Mon Oct 25 08:16:46 EDT 2004 | mmjm_1099
This is what I have come across with some of the gerber datas. Most CAD/Gerbers don't carry the fiducials because some of my customers don't have them as a standard but when the board house gets it they are the ones adding the fiducials. So send in a
Electronics Forum | Fri May 14 13:12:00 EDT 2004 | russ
This little bit was interesting, I posted a very similar response the other day in agrrement with newbie, I was starting to get a little ticked myself and the "going back to the basics" questions that we are starting to see more and more of. I afte
Electronics Forum | Mon Mar 01 16:26:38 EST 2004 | rhdez
Is this problem with local fiducials or global? Is the problem on the same equipment? Is this a cad file o centroid? How are you measure the coordinates?
Electronics Forum | Tue May 08 04:58:12 EDT 2001 | Kemosabe
I've never heard of such thing!!! We do occasionally have problems with fiducial recognition and have a difficult time convincing our operators not to use pencil erasers on them. The erasers take care of the recognition problems, but leave shavings
Electronics Forum | Tue May 08 08:41:29 EDT 2001 | caldon
Hmmmmm........I am thinking!!!!! Cleaning is the final process in our situation. After cleaning we have no need for the fiducials. Is the haze causing fiducial recognition problems? Ideally what you are looking for is a contrast between fiducial and
Electronics Forum | Tue Mar 02 22:40:52 EST 2004 | pdeuel
To clean up other replys I will add that some most all machines have global correction. Most placements are an off sets from pcb 0,0 usually the lower left corner of the board. When the machine locates the fiduitals and these fids are not exactly whe
Electronics Forum | Wed Sep 17 05:18:55 EDT 2008 | ralphspm
Our Fuji IP2 has a problem reading fiducial marks.It finds the mark(is shown on console display) but after time gives out the error statement "image display time over".It gives out an error status code of "FFFC" on the console display.Cannot find any
.gif)
