Electronics Forum | Fri Jun 03 15:30:06 EDT 2005 | nealh
We are currently using CirciutCAM for our documentation and run a Fuji line with a CP643 and an IP2. We are using FujiCam to program. I wouldlike to replace the IP2 with a Mydata My9 and here are my questions. Who out there is using CIrcuitCAM to pr
Electronics Forum | Fri Jun 04 13:23:54 EDT 2010 | mmjm_1099
For the machines that are similar I would start by making sure the model name and machine name are different. The machine type can be the same but you need to add a different sufix at the end or something. See if this helps and should be able to do s
Electronics Forum | Wed May 26 05:58:50 EDT 2010 | chrislyttle
Hi, first time posting on here. We've recently acquired additional Fuji machines to add to our line and have moved premises to a new factory. I've been trying to set up a new factory line in Line Editor to use two of our existing machines (Fuji GSP
Electronics Forum | Tue Jun 16 22:19:24 EDT 1998 | Ben Salisbury
The company I work for has only 1 SMT line all FUJI 89 vintage, My expierience with the Industry started with this line when it was brought into the company 2 years ago, from day one I've been the Process tech for the line and have learned a great de
Electronics Forum | Tue Mar 09 21:22:59 EST 1999 | Dean
| When a board has loaded into the machine and the fiducials do not line up I have tried to use mark edit to set an offset into the program. I lined up the crosshairs and set the data. For some reason the machine did not accept this info. Does any
Electronics Forum | Tue Mar 09 14:29:40 EST 1999 | Jason Hall
When a board has loaded into the machine and the fiducials do not line up I have tried to use mark edit to set an offset into the program. I lined up the crosshairs and set the data. For some reason the machine did not accept this info. Does anyone h
Electronics Forum | Tue Jun 16 22:26:04 EDT 1998 | Dave F
| The company I work for has only 1 SMT line all FUJI 89 vintage, My expierience with the Industry started with this line when it was brought into the company 2 years ago, from day one I've been the Process tech for the line and have learned a great
Electronics Forum | Mon Nov 22 09:31:29 EST 2004 | cyber_wolf
We have tried the vision both ways. Leads/body. Same issue. FYI Ken : The parts were not hitting the feeder pan on the back of the machine. I know this sounds really weird, but it seems that when we generate a program from Flexa(as opposed to FujiC
Electronics Forum | Mon May 31 22:52:14 EDT 2010 | fujiphil
I think placing QFN in CP6 will be no problem....
Electronics Forum | Thu Jun 10 16:54:30 EDT 2010 | dcell_1t
Thanks for the replies!! We reduced the speed as you commented and yes, the accuracy improved considerably.
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
