Electronics Forum | Tue Nov 11 21:21:54 EST 2014 | sonavc
Thank you, that is help, I always change in program and re-transmit. One more question, I program N_data with capacitor is TANTB (using M nozzles in part data). but when I run the program in machine it is always use S nozzles to pick the cap. TANTB
Electronics Forum | Tue Nov 11 13:25:17 EST 2014 | jimmyboz
I do not recall that "TEACH" ever worked. Even if it did, there is no way to save this data to the MCS. After you see that a fiducial cannot be found, change Xa-Ya in the program at the MCS to find it, and of course, re-transmit. Good Luck
Electronics Forum | Fri Nov 01 17:32:34 EDT 2013 | dhruv_trylene
I am sorry for not being clear enough... We have a FUJI CP642 and a IP3 machine. At present, we have to create part data for each and every part used in a job, which consumes a lot of time. I was just wondering if there was a way to minimize this?
Electronics Forum | Mon Nov 04 12:18:12 EST 2013 | jimmyboz
Its been a couple years since I worked with Flexa every day. The program uses the part number and this should reference some shape library. If you understand the nomenclature of this library, it should get you close. I don't remember if the default
Electronics Forum | Mon Nov 04 12:21:03 EST 2013 | jimmyboz
Its been a couple years since I worked with Flexa every day. The program uses the part number and this should reference some shape library. If you understand the nomenclature of this library, it should get you close. I don't remember if the default
Electronics Forum | Tue Mar 30 16:26:49 EDT 2010 | mikesewell
I think Flexa only outputs part data in binary format. From the Flexa help file for the Director-File menu: Export... Exports jobs or part data files (in binary format). Output Recipes Outputs the recipes in a job (in CCIMF format).
Electronics Forum | Tue Mar 30 16:02:19 EDT 2010 | jlawson
Does anyone know how to export Part Data from Flexa into CCIMF format - just want the parts only no board of Placement info etc? Is this possible ?
Electronics Forum | Fri Jul 19 11:02:15 EDT 2019 | dman97
You never answered my question on the proper data. Do you have a hard copy of the proper data? Is the diskette (if you have it) in Fuji Flexa format? In order for flexa to communicate with the CP6, you must have the correct proper data.
Electronics Forum | Tue Jul 02 10:37:36 EDT 2019 | dman97
I also forgot to add that if the proper data was not generated by flexa for the CP6, then flexa will not communicate with the machine. You need to flush the proper and resend using flexa for the communications to work correcty. Good luck!
Electronics Forum | Wed May 27 18:19:58 EDT 2009 | dcell_1t
yesterday I tried with vision type 20, just defined the two pair of leads and error 1CA14003 came up, on flexa error help says the following: Cause: The Vision_type in part data is expressed using hexadecimal notation (??). If ?? equals 0A, 0B, 0C,
